dual_auger
12Pages

32 Series Dual Auger Grain Cart X-tended Reach Dual Augers Designed to the

Dual Augers Designed to the Next Level J&M’s new 32 Series X-Tended Reach grain carts take dual auger designs to the next level by combining all the advantages of a single auger front folding design with the low profile of a dual auger grain cart. The vertical unloading auger features a front-folding X-Tended Reach design, providing greater upward, outward and forward reach for superior operator visibility and reduced fatigue. A 22” diameter auger, reinforced at critical wear points and 7/16” MaxEdge flighting with 15” pitch at intake, provides maximum unloading speed and durability. The...

X-tended Reach 32 Series Dual Auger Grain Cart Low Profile The 32 Series dual auger grain carts offer the lowest profile design on the market, providing maximum clearance for the combine auger and a lower center of gravity for added stability over uneven terrain. Unload Position High Performance Inner Spout Outer Spout The patented X-Tended Reach design also offers greater upward, outward and forward reach, allowing the operator greater visibility while unloading. The extended side reach allows the operator greater performance, allowing the auger to reach across the ditch and keep the...

32 Series Dual Auger Advantages Direct Drive Design Typical dual auger grain carts utilize costly belts, sprockets or pulleys that can cause problems and increase maintenance expense. The 32 Series X-Tended Reach Grain Cart features a powerful direct drive design with dual gearboxes to maximize unload efficiency and performance, year after year.

X-tended Reach 32 Series Dual Auger Grain Cart 7/16” MaxEdge Flighting J&M’s Dual Auger Designs 2 22” Auger • Unload Auger Extends From Tank for maximum operator visibility • Smooth Transition between horizontal and vertical augers reduce grain damage and increases unload efficiency (no sump needed) 20” Horizontal Auger In-Line Auger Transition Smooth Transition Many competitor dual auger grain cart designs move grain from the tank to the unload auger in three directions. First the grain is moved horizontally across the floor of the tank. Second, the grain is dropped downward into a sump....

32 Series Dual Auger Advantages Heavy-Duty Gearbox Auger Design 2” output shaft and industry best bearing ratings ensure maximum performance and durability. Reinforced at critical wear points and 7/16” MaxEdge flighting with 15” pitch at intake, provides maximum unloading speed and durability. 3/8” Rod at Critical Pick-up Points 22” Auger Competitor Bearing 2” Output Shaft J&M Heavy-Duty Gearbox 362 HP Static/168 HP Dynamic

X-tended Reach 32 Series Dual Auger Grain Cart V-Truss Axles & Oversized Spindles Competitor grain cart axles feature small tubular steel that is prone to bending or I-beam designs that are prone to twisting. This can put premature stress on the rest of the cart. J&M’s exclusive V-Truss axles are designed using heavy-duty tubular steel with a reinforced v-tuss design to resists both bending and twisting, protecting the cart from premature wear and tear. J&M also uses larger 6” spindles compared to competitor’s smaller 4 1/2” spindles. J&M uses larger hubs and bearings to handle the heaviest...

Superior Strength and Stability…Less Maintenance Tensioner “Set it and forget it.” The new Stabilizer Trax feature a maintenance free spring tensioner so there is no need for adjustment once set. With over 3.5:1 tension ratio, the 0.59” chrome silicon springs are capable of providing over 13,000 lb. of belt tension. Bogie Wheels J&M’s new Stabilizer Trax System provides superior performance while reducing maintenance and increasing cart life. The patent pending design features rubber springs and oscillating bogies to significantly reduce tank shock loads and vibration, while providing...

X-tended Reach Swivel Hitch Alignment The new alignment mechanism uses only one %" bolt for adjustment and is easily accessible from the side of the cart. The low maintenance steel keeper prevents loosening during operation. 36" Stabilizer Trax Model 36145-STX Idler Wheel Width 32.6" Footprint Dimensions (One Track) 36" x 104" Footprint Area (Both Tracks) 7,520 in2 Avg. Ground Pressure with 1,500 Bushel Cart 13.8 psi Pivot Shank 6" Dia. Idler Wheel Width 42.6" Footprint Dimensions (One Track) 46" x 108" Footprint Area (Both Tracks) 9,942 in2 Avg. Ground Pressure with...

SPECIFICATIONS Single Wheel Option MODEL 1132 MODEL 1432 Unload Time (bu/min) up to 740+ up to 760+ 1050/50R32, or _1250/50R32 Hubs (2) 10 Bolt or 20 Bolt 10 Bolt or 20 Bolt Tongue Weight Total Weight (approx.) 18,650 lbs.* 19,050 lbs.* Walking Tandem Dual Wheels Option DIMENSIONS MODEL 1132* MODEL 1432** Capacity 1,150 Bushels ' _J^^^j1,450 Bushels A 10'-1” 11'-3” << LOW SIDE HEIGHT Auger, One Horizontal 20” 20” C 11'-0” 11'-0” << GREAT SIDE REACH Capacity 1,125 Bushels 1,425 Bushels * Measured witt 9oo/60R32 Uies roll...

SPECIFICATIONS DIMENSIONS Tracks Option Capacity Auger, One Vertical Auger, One Horizontal Unload Time (bu/min) Tracks (2) Tongue Weight Empty Loaded Total Weight (approx.) Compaction Rate MODEL 1832 MODEL 2032 MODEL 2332 << LOW SIDE HEIGHT << GREAT SIDE REACH 3” Versus Flat Plate Ground Pressure Calculations Don't be fooled by the "3” Ground Penetration” compaction ratings used by some competitors. 3” Ground Penetration measures the surface area of the tire 3” above the flat plate. This allows a much larger surface area and the compaction ratings appear to be better than compaction ratings...

32 Series Specifications & Dimensions J & M MANUFACTURING CO guarantees against any faulty construction or materials for a period of ONE year. We reserve the right to inspect and decide whether material or construction was faulty or whether abuse or accident voids our guarantee. Specifications are subject to change without notice or obligation. ® Registered Trademark of J.& M. Mfg., Co. Inc. J&M Manufacturing Co, Inc • 284 Railroad Street • Fort Recovery, Ohio 45846 • (419) 375-2376 • fax: (419) 375-2708 • sales@jm-inc.com