Knapsack Sprayer Jacto PJB
55Pages

CAUTION: IT IS MANDATORY TO READ AND THOROUGHLY UNDERSTAND THE OPERATOR’S MANUAL BEFORE USING THE EQUIPMENT. Operator’s Manual - English Code: 1258730 / Date: 10-2019 / Edition: 1 Knapsack Sprayer Jacto Manual de Instruções - Português (16) Manual del Operador - Español (28) Manuel du Operateur - Français (40) Manufactured by INTERMAN Corporation Ltd. under license of Máquinas Agrícolas Jacto S.A. Rojana Industrial Park (Rayong) 3/3, Moo 2, Bankhai-Banbueng Rd.T. Nongbua. A.Bankhai Rayong 21120 - Thailand E-mail: jacto@jacto.com.br / export@jacto. com.br Customer attendance: Dr. Luiz Miranda, 1650, 17580-000 – Pompeia – SP – Brasil. Phone: +55 14 3405 2113. Email: assistencia.tecnicajsfs@jacto.com.br Opening Hours: Monday to Friday 7:00am to 11:30am and 13:00pm to 17:18pm (Brazili

SUMMARY SUMMARY 3. General Power Tool Safety Warnings 3. Alertas de Segurança para Ferramenta Elétrica em Geral 3.1. Work area safety 3.1. Segurança da área de trabalho 3.4. Power tool use and care 3.4. Uso e cuidado da ferramenta elétrica 3.5. Battery tool use and care 5. Important Safety Instructions for Battery Chargers 5. Instruções de Segurança Importantes para 5.2. Important charging notes 5.2. Notas importantes de carregamento 6. Important Safety Instructions for Battery Packs 6.1. Storage recommendations for batteries 7. Important Safety Instructions for Sprayers 7.1. Triple rinse...

3. Alertas de Seguridad para Herramientas Eléctricas en General 3. Avertissements de sécurité généraux pour l’outil 3.1. Seguridad en el área de trabajo 3.1. Sécurité de la zone de travail 3.4. Uso y cuidados de la herramienta eléctrica 3.4. Outil électrique utilisation et l’entretien 3.5. Batterie des outils utilisation et entretien 5. Instrucciones de Seguridad Importantes para Cargadores de Batería 5. Consignes de sécurité importantes concernant les chargeurs 5.2. Observaciones importantes sobre carga 5.2. Notes importantes de charge 6. Instrucciones de Seguridad Importantes para la...

NOTE: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may result in property damage. SAVE THESE INSTRUCTIONS: This manual contains information for the proper assembly, operation and care of your sprayer. Carefully read and follow the instructions contained in this manual before using your sprayer. 3. General Power Tool Safety Warnings This equipment was designed for spraying plants protection products approved by regulatory authorities to be used in knapsack sprayers. The product may be subject to national requirements for regular...

g. If devices are provided for the connection of dust extraction and collection facilities, ensure these are connected and properly used. Use of dust collection can reduce dust-related hazards. 3.4. Power tool use and care 5. Important Safety Instructions for Battery Chargers SAVE THESE INSTRUCTIONS: This manual contains important safety instructions a. Do not force the power tool. Use the correct power tool for your application. The correct power tool will do the job better and safer at the rate for which it was designed. b. Do not use the power tool if the switch does not turn it on and...

Do not mount charger on wall or permanently affix charger to any surface. The charger is intended to use on a flat, stable surface (i.e., table top, bench top). Do not operate charger with damaged cord or plug - have them replaced immediately. Do not operate charger if it has received a sharp blow, been dropped, or otherwise damaged in any way. Take it to an authorized service center. Do not disassemble charger; take it to an authorized service center when service or repair is required. Incorrect reassembly may result in a risk of electric shock, electrocution or fire. Disconnect the...

7. Important Safety Instructions for Sprayers For example: in a 1000 ml container, put 250 ml of water. 3. DO NOT spray flammable or combustible chemical products. This will result in serious risk of fire and explosion. DO NOT spray acids or corrosive chemicals. This will result in serious risk of fire, explosion and leakage. Sprayer parts can be permanently damaged. Agitate the container strongly in all ways (horizontal and vertical), for approximately 30 seconds to remove the residues that are on the container internal walls. Take the container cap off and carefully pour the rinse water...

8.2. Assembling the lance to the trigger valve Fit the lance into the trigger valve and thread enough so that there is no leakage, as shown in the image below: Identification (code) Nozzle type Flow rate (l/min) 8.3. Assembling the hose to the sprayer • Fit the hose through the S-20 nut, attach it to the connector and thread it. • Plug the connector into the quick coupler and press until it clicks. Very Thin Very course Extremely course WARNING! Use PPE to service and replace parts. 9. Operating Instructions The following steps describe how to safely use the sprayer. 9.1. Choosing nozzle...

9.2. Pressure, flow rate and autonomy of each nozzle type Nozzle Flow rate (L/min) • Remove the cap, nozzle and filter. • Mount the calibrator cover to the lance. • Reinstall the filter, nozzle and cap. • Screw the calibrator onto the cover. Calibrator bottle • Attach the calibrator bottle to the lance as shown: Lance Cover Record the time it takes to walk 25 m² NOTE*: Nozzle has not reached working pressure (15 psi). NOTE**: The values above may vary as to the wear, clogging and variation of the nozzles, the density and viscosity of the liquid to be applied, the temperature and relative...

To tighten the strap belt, hold the strap buckle firmly with one hand and pull the handle downward with the other hand. To loosen the strap belt, hold the buckle firmly with one hand and pull the strap upward with the other hand. cally shuts off and the LED will remain flashing. Turn the sprayer off and recharge battery. 9.9. Pressure levels To adjust the pressure level: • Place the spraying lance in a safe direction and press the trigger to start spraying; • Turn the potentiometer clockwise to increase the pressure, and counterclockwise to decrease it. Choose the level as desired. •...