SPIRA® Power Sections Specifications Handbook

SPIRA Power Sections

SPIRA® Power Sections ® ■ Higher ROP by increased motor differential pressure ■ Higher operating temperature ■ High performance, high temperature NBR & HNBR rubber compounds ■ Increased longevity / less tripping / to depth drilling ■ Lends itself to low speed / high torque motor designs ■ Higher torque at same length of conventional power sections ■ Shorter power sections at same torque of conventional power sections ■ Less swelling & stator profile distortion by aggressive drilling fluids ■ Uniform swelling around stator contour ■ Uniform heat expansion around stator contour ■ Minimal stator...

SPIRA Power Sections Power Section Fit Change Temperature Change (°C) 1028 Fit Change in Radius (inch) ARTEMIS Kautschuk- und Kunststoff - Technik GmbH | Rothwiese 4 | 30559 Hannover | Germany Ph. +49 (0)511/ 9 59 28-0 | Fax +49 (0)511/ 9 59 28-55 | [email protected] | www. artemis-kautschuk.de

Performance curves are for reference only (@ 175 °F). Actual power section performance may vary depending on operating conditions (e.g. chosen rotor/stator interference fit, possible rubber swelling by drilling fluid, actual downhole temperature, actual stator temperature, physical properties of the drilling fluid). Data subject to change without notice.

ARTEMIS 2.75" 5/6 3.5 SPIRA© rev. 10/2011 (based on dynometer test) Torque (ft-lbs) Motor Differential Pressure (psi) ARTEMIS Kautschuk- und Kunststoff - Technik GmbH | Rothwiese 4 | 30559 Hannover | Germany Ph. +49 (0)511/ 9 59 28-0 | Fax +49 (0)511/ 9 59 28-55 | [email protected] | www. artemis-kautschuk.de

Performance curves are for reference only (@ 175 °F). Actual power section performance may vary depending on operating conditions (e.g. chosen rotor/stator interference fit, possible rubber swelling by drilling fluid, actual downhole temperature, actual stator temperature, physical properties of the drilling fluid). Data subject to change without notice.

Torque (ft-lbs) Motor Differential Pressure (psi) ARTEMIS Kautschuk- und Kunststoff - Technik GmbH | Rothwiese 4 | 30559 Hannover | Germany Ph. +49 (0)511/ 9 59 28-0 | Fax +49 (0)511/ 9 59 28-55 | [email protected] | www.artemis-kautschuk.de

SPIRA® Power Sections Artemis 4.75" 7/8 3.8 SPIRA® TNT No. of Stages Performance curves are for reference only (@ 175 °F). Actual power section performance may vary depending on operating conditions (e.g. chosen rotor/stator interference fit, possible rubber swelling by drilling fluid, actual downhole temperature, actual stator temperature, physical properties of the drilling fluid). Data subject to change without notice.

Torque (ft-lbs) Motor Differential Pressure (psi) ARTEMIS Kautschuk- und Kunststoff - Technik GmbH | Rothwiese 4 | 30559 Hannover | Germany Ph. +49 (0)511/ 9 59 28-0 | Fax +49 (0)511/ 9 59 28-55 | [email protected] | www.artemis-kautschuk.de

SPIRA® Power Sections Artemis 5.00" 5/6 8.3 SPIRA' No. of Stages Performance curves are for reference only (@ 175 °F). Actual power section performance may vary depending on operating conditions (e.g. chosen rotor/stator interference fit, possible rubber swelling by drilling fluid, actual downhole temperature, actual stator temperature, physical properties of the drilling fluid). Data subject to change without notice.

Torque (ft-lbs) Motor Differential Pressure (psi) ARTEMIS Kautschuk- und Kunststoff - Technik GmbH | Rothwiese 4 | 30559 Hannover | Germany Ph. +49 (0)511/ 9 59 28-0 | Fax +49 (0)511/ 9 59 28-55 | [email protected] | www. artemis-kautschuk.de

Performance curves are for reference only (@ 175 °F). Actual power section performance may vary depending on operating conditions (e.g. chosen rotor/stator interference fit, possible rubber swelling by drilling fluid, actual downhole temperature, actual stator temperature, physical properties of the drilling fluid). Data subject to change without notice.

ARTEMIS 6.75" 5/6 5.0 SPIRA© rev. 10/2011 (based on dynometer test) Torque (ft-lbs) Motor Differential Pressure (psi) ARTEMIS Kautschuk- und Kunststoff - Technik GmbH | Rothwiese 4 | 30559 Hannover | Germany Ph. +49 (0)511/ 9 59 28-0 | Fax +49 (0)511/ 9 59 28-55 | [email protected] | www. artemis-kautschuk.de

Performance curves are for reference only (@ 175 °F). Actual power section performance may vary depending on operating conditions (e.g. chosen rotor/stator interference fit, possible rubber swelling by drilling fluid, actual downhole temperature, actual stator temperature, physical properties of the drilling fluid). Data subject to change without notice.

ARTEMIS 6.75" 5/6 5.3 SPIRA© rev. 10/2012 (based on dynometer test) Torque (ft-lbs) Motor Differential Pressure (psi) ARTEMIS Kautschuk- und Kunststoff - Technik GmbH | Rothwiese 4 | 30559 Hannover | Germany Ph. +49 (0)511/ 9 59 28-0 | Fax +49 (0)511/ 9 59 28-55 | [email protected] | www. artemis-kautschuk.de

SPIRA® Power Sections Artemis 6.75" 7/8 5.0 SPIRA® TNT No. of Stages Performance curves are for reference only (@ 175 °F). Actual power section performance may vary depending on operating conditions (e.g. chosen rotor/stator interference fit, possible rubber swelling by drilling fluid, actual downhole temperature, actual stator temperature, physical properties of the drilling fluid). Data subject to change without notice.

ARTEMIS 6.75" 7/8 5.0 SPIRA© TNT rev. 10/2011 (based on dynometer test) Torque (ft-lbs) Motor Differential Pressure (psi) ARTEMIS Kautschuk- und Kunststoff - Technik GmbH | Rothwiese 4 | 30559 Hannover | Germany Ph. +49 (0)511/ 9 59 28-0 | Fax +49 (0)511/ 9 59 28-55 | [email protected] | www. artemis-kautschuk.de

SPIRA® Power Sections Artemis 6.75" 7/8 5.9 SPIRA® TNT No. of Stages Performance curves are for reference only (@ 175 °F). Actual power section performance may vary depending on operating conditions (e.g. chosen rotor/stator interference fit, possible rubber swelling by drilling fluid, actual downhole temperature, actual stator temperature, physical properties of the drilling fluid). Data subject to change without notice.