Chipper truck

Dear reader, when we spoke to our customers about the first chipper trucks in 2006, the Euro 3 emission category was standard at the time. After this the Euro 4 and Euro 5 categories arrived within a few years, and now Euro 6 has been applicable since 2014. We were able to supply Euro 5 HGVs during 2015 through the use of appropriate scheduling, but this has now definitely come to an end. All HGVs which are registered new now have to fulfil the Euro 6 emission category. This new exhaust emission standard results in major changes to the vehicle. This applies especially to the exhaust system, which...

Publisher: JENZ GmbH Maschinen- und Fahrzeugbau Wegholmer Str. 14 | D-32469 Petershagen Tel.: +49 (0) 5704/9409-0 Fax: +49 (0) 5704/9409-47 E-Mail: [email protected] Web: www.jenz.de © October 2015 Liable for content: Uwe Hempen-Hermeier HGV driver's cab with mowing window 04 Rotating cab 05 easygreen control system 07 Driving while chipping 09 Material outfeed as required 14 JENZ combined cooler 15 The content of this publication has been compiled with great care. However, we do not accept any liability for the correctness, completeness and up-to-dateless of the contents. Subject to...

HGV driver’s cab with mowing window HGV driver’s cab with mowing window Take your seat in HGV with amazingly comfortable long-distance driving equipment. The space available and the excellent view are setting standards! The driver does not have to leave the cab to change between driving and chipper operation. Just quickly change places to the operator’s seat, and off you go. From here you have an obstructed view over the fitted chipper draw-in area through an enlarged rear window. An additional side window provides a good overview of the woodpile. All the operating elements are ergonomically...

JENZ can offer the fitting of a rotating CLAAS X10 cab as an alternative to the HGV driver's cab. The decisive advantage is that the driver no longer has to change from the driver's seat to the chipper operator seat because the cab can swivel through up to 160°. Just sit down and off you go! Driving and chipping from one and the same workplace, and all this with an optimum view of the woodpile, the draw-in table and the crane. Relocating the machine with the cabin rotated does not pose problems. The chipper can be moved at a fast walking pace when the driver is looking towards the draw-in table,...

HGV chassis The chipper truck concept is just as simple as it is ingenious. The chip has been fitted on a compact, triple-axle MAN HGV chassis and is driven by the HGV engine. An additional engine is not required. The result is an un-beatably economic machine which in terms of off-road capability is almost as good as a tractor-trailer combination. Depending on the model, motor powers of 360 or 480 hp are available. The machines are ready for operation on site within a very short time, are completely stable and very quiet. The chipper truck is also fast and economic or when travelling on the road....

All chipper truck functions are operated via the easygreen terminal – a display controller which intuitively guides the operator through the machine control. Easygreen is used in all JENZ machines. The basic menu navigation is always the same. This reduces the training costs to a minimum. Practical additional functions make working even easier: for example, the driver can adjust the crane control (sensitivity, speed, joystick allocation) entirely to suit his tastes. The user profile can be saved and called up again at any time. The terminal automatically gives the driver information about faults....

Main drive Main drive Reverse gear HGV transmission Bequeme Bedienung Rit iscimin nita solent volupta aut ad HGV power divider magnatur? Denis aut moluptassi nit enimolestem re plabor que pe libus imi, et ea volese modisci licium, totatio cor sim repe si- Main drive HEM 583/820 R-Truck chipper truck The principle of the chipper truck is based on the fact that the add-on chipper is driven by the HGV engine. Power transmission takes place in various ways depending on the model: in the case of the largest chipper truck quae (HEM 583 and above), que Idelitmodelsex exeriam rest arumthe power is transmitted...

Driving while chipping Driving while chipping On request, JENZ can offer a hydrostatic drive with an electro-hydraulic propulsion drive for all chipper truck models. Using this solution the driver can move the HGV hydraulically at slow speed with restricted tractive force without having to change seats – the perfect solution for working on level, asphalted roads. The drive functions are controlled using the loading crane joysticks, the drive does not have to be disengaged. The function can easily be activated using the JENZ easygreen control system. The chipper truck is ready for action again...

Chipper drums Cross section HEM chipper drum top infeed roller cog wheel screen basket spills clearing system counter knife infeed conveyor blower wing Chipper drums less fines content and good chipping flow with coarse chippings less overlength with light cuttings Special types Single knife drum knives can be re-ground Benefits: extremely quiet, jerk-free running when chipping standing timber and fine woodchippings Drum with row of separate blades coarser woodchippings and lower fines content

Blade system JENZ blade system − the original upper wedge Benefits: ∙ no re-grinding ∙ o further n handling costs Blades Universal blade Very fine chippings for pellet production Blade system good for changing materials Softwood blade easy-running, high throughput Hardwood blade long service life Hardwood blade, reinforced extra thick, especially stable Pre-grip distance from drum body to blade cutter upper wedge

The chipper truck reduces the requirement for maintenance and repairs to a minimum. After all, you want to earn money with the machine. This is only possible if the chipper is ready to use again quickly. The screen basket cover can be hydraulically opened for all chippers. This means that the chipper rotor is freely accessible immediately. This allows the blades to be sharpened or replaced easily from a standing position. The screen basket can be replaced without tools. All electrical components are fitted together in a protective housing.