Straw blower mounted Silage feeder blower mounted
Straw blower mounted Silage feeder blower mounted
This document provides technical specifications and equipment details for two models of agricultural machinery: the Silage Feeder Straw Blower Mounted and the Straw Blower Mounted. The information is subject to change without notice as per the manufacturer's discretion.
- Silage Feeder Straw Blower Mounted: Body volume of 2.50 m3, length of 1550 mm, width of 1450 mm, height of 1140 mm, dispensing height of 1100 mm, and an empty weight of 1430 kg.
- Straw Blower Mounted: Body volume of 2.10 m3, length of 1300 mm, width of 1450 mm, height of 1140 mm, dispensing height of 1100 mm, and an empty weight of 1080 kg.
- Bolted housing and electric control with a mobile control box in the tractor's cab.
- PTO transmission with protection and safety bowl on the machine side.
- Linkage bar category 3 for raising.
- Round silage shovel with 2 cylinders on the arms and shovel.
- Gearbox with 2 gears (feeding at 270 rpm, bedding at 540 rpm).
- Rear hydraulic door with 2 cylinders and a gearbox with 1 gear.
- Shredding by blower and cone with anti-abrasive steel housing.
- Hydraulic control deflector and lateral bedding chute activated by 1 cylinder.
- Bedding capability from 0 to 18 m with round bales (maximum Ø 1.50 m).
- Marine chain Ø 10 on the conveyor with removable rectangular tubes.
- Adjustable speed floor conveyor driven by moto reductor oil bath.
- Removable bottom and sides with dual floor and sprung trap door for easy cleaning.
- 1 PTO shaft for 540 rpm.
- 1 electric plug 12v/3 pins for electrical distributor.
- 1 hydraulic distributor 1 SE with direct return.
- Minimum flow of 25 l/min.
- Hydraulic orientation of feeding and bedding chute at 300° with mulching at 15m maximum.
- Lateral feeding and bedding hydraulic chute front and rear at 30°.
- Hydraulic cylinder on the cap and electric speed shifting.
- Sections kit for blower and rear articulated light in accordance with the Highway code.
Catalog excerpts
rHEAD OFFICE : Z.I. Nord - Villebarou - 3 rue des Mardeaux 41000 VILLEBAROU (Blois) - France POST ADDRESS : 3 rue des Mardeaux - CS 4311 - 41043 BLOIS CEDEX - France The information privided is not contractual. The manufacturer reserves the right to modify without notice this equipment's specifications,
Open the catalog to page 1
SILAGE FEEDER STRAW BLOWER MOUNTED The BREVA is simple machine, efficient and robust, shredding by blower. STRAW BLOWER MOUNTED The blower is fitted with shredding fingers that can receive sections in additional equipment. On the blower, a cone is fixed which allows you to attack and to shredd the product before ejection. Silage feeder model 14 Possible Impossible ADDITIONAL EQUIPMENT Feeding and bedding chute hydraulic orientation at 300° - Mulching at 15m maxi Lateral feeding and bedding hydraulic chute front and rear 30° Hydraulic cylinder on the cap Gearbox 2 gears ( 270 rpm - 540 rpm) Electric...
Open the catalog to page 2All JEULIN catalogs and technical brochures
Pik-up loader wagon2 Pages
Straw blower dispenser-mixer2 Pages
Désileuses distributrices2 Pages
Ouragan2 Pages
BREVA2 Pages
- Cart
- Agricultural trailer
- Tandem axle wagon
- Feed mixer
- Vertical mixer
- Towed mixer
- Single-axle wagon
- Side discharge mixer
- Trailer with hydraulic braking
- 2-auger mixer
- Single-auger mixer
- Mixer with weighing system
- PTO-driven mixer
- Trailer with pneumatic braking
- Mounted trailer
- Silage wagon
- Trailer with mechanic braking
- Loader wagon
- Bedding bale processor