TOPAZ DIFFERENTIAL Product Info Description Topaz Differential valves are ideal for use in water tanks which are filled by a pressure system controlled water pump. The valve gives a level difference which is adjustable from 50mm up to 2.5m to minimise starting and stopping of the pumping system. Maintaining Water Levels in: • Water Storage Tanks • Water Cisterns • Irrigation Applications • The valve mounts at the top of the tank. It fits easily through a thin walled tank or screws into a threaded tank inlet. Flow Graph Gallons/Minute • As the tank empties the weighted float travels down the cord until it hits the bottom stop. The valve then opens immediately to give a full flow. Valve Inlet Pressure The valve now runs constantly and the weighted float rises until it hits the upper float stop. This lifts the arm and the valve shuts down. Observe the pressure that your pump runs at while the tank is filling. Set the pressure switch to turn the pump off at a pressure at least one bar above the running pressure. Features • High flow • Start and stop levels can be easily adjusted to give water level differentials from 50mm to 2.5 m • Keeps pump operation to a mininum. • DetachTM Valve Seal Access System for quick access to valve seal (Patented) • Ideal for all makes and models of tanks. Typical Installation Available Inlet Sizes 15mm (1/2”) 20mm (3/4”) 25mm (1”) 32mm (1 ¼”) All supplied in Detach long tail thread with back nut © Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E

TOPAZ DIFFERENTIAL DIMENSIONS & MATERIALS Topaz Dimensions Springs, Bolts, Nuts, Pin, Screws 304 Stainless Steel Santoprene Nitrile HDPE Float Cord Yellow & White Internal Parts (1/2”) Long Tail (3/4”) Long Tail (1” ) Long Tail (1 1/4”) Long Tail Valve Body Detach Seal Maximum Temperature of Operation 45ºC, 115ºF NB: High Temperature models on request. © Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: [email protected] W: www.jobe

TOPAZ DIFFERENTIAL PARTS IDENTIFICATION SHEET CODE DESCRIPTION Float, Arm & Weight Assembly Diaphragm Assembly Detach Base Assembly 3 TPPD1030 Upper Float Stop 1 TPPD1010 Weighted Tube Stop 6g x 10 S/S Screw Frost Pro Plug TPP2040 Frost Pro O’ring TPP2050 Valve Cap Assembly TPPD2061 Damping Spring TPP2080 Bearings (set of two) TPP2090 Actuator Arm TPP2100 6g x 25 S/S Screw Detach Tail 15mm (½’’) Long Detach Tail 20mm (¾’’) Long Detach Tail 25mm (1”) Long Detach Seal Detach Filter Detach Base Detach Tail 1” NPT Long Detach Tail 32mm (1¼”) Long Detach Tail 1¼” NPT Long © Jobe Valves P.O Box 17...