Topaz Industro
3Pages

TOPAZ INDUSTRO FLOAT VALVE Product Info Description Topaz Industro Float Valves are designed to maintain water levels in applications requiring a valve with high mechanical strength and heat resistance. Some typical applications would be refilling cooling towers and storage tanks, high pressure cleaning and car wash systems as well as many light industrial, air conditioning and irrigation installations. Mounting Positions Maintaining Water Levels in: • Car wash systems • Water Storage Tanks • Water Cisterns • Air Conditioning Systems • High Pressure Cleaning Systems • Irrigation Applications SIDE ENTRY TOP ENTRY WITH EXTENSION Flow Graph Two inlet diameters above overflow to avoid back siphoning N.B. Some mounting positions may not comply with local regulations Valve Inlet Pressure Specifies this Thread size BOTTOM ENTRY Detach Base Short Tail Flow Litres/Minute 15mm (½’’) 20mm (¾”) 25mm & 32mm (1’’ & 1 ¼”) Detach Base Long Tail Long Tail: Detach Supplied with backnut and seal washer ¾” Long Tail: 38mm long. • High flow • Compact robust construction Standard Optional Optional • Maximum water Floats: 125mm wide floats supplied standard. Note: Suitable for any mounting position temperature 80ºC / 176ºF • Made from approved 70mm and 95mm floats optional materials Note: Suitable for top entry only. • Mounts horizontally or 70mm 95mm 125mm vertically • Made from corrosion resistant materials TOPAZ INDUSTRO FLOAT VALVE SPECIFICATION • Shuts down slowly to minimise water hammer PRODUCT CODE INLET SIZE CODE OPTIONS CODE • 20 - 60mm (¾” - 2 ½”) water level differential Topaz Industro TIV ¾” bsp/npt 20 Detach Base D (increases as water inlet Float Valve 1” bsp 25 Long Tail Base LT pressure increases) 1” npt 1 • Pressure rating 0.3 - 7 Bar 1” ¼’’ bsp 32 70mm wide Float F70 (5 - 100 PSI) 1” ¼’’ npt 114 95mm wide Float F95 • Float position easily adjustable with no tools (e.g) A Topaz Industro Float Valve with: ¾” bsp inlet thread, detach base, long tail thread has • Valve has switch to lock it in the following spec number: TPVI 20 D LT NOTE: If no options are specified the standard ones will be supplied off position • Has port to connect Frostpro Note: Product may differ slightly from these specs due to ongoing product development. anti freeze device © Jobe Valves P.O Box 17 Matam

TOPAZ INDUSTRO DIMENSIONS & MATERIALS Topaz Dimensions A B C D E F G H 3/4” Short tail 1” bsp/npt short tail 1 1/4” bsp/npt short tail 1/2” long tail 3/4” long tail 1” bsp⁄npt long tail 1 1/4” bsp⁄npt long tail I Valve Body Float Cord Detach Seal Springs, Bolts, Nuts, Pin, Screws Valve Seal White Internal Parts Float Dimensions Maximum Temperature of Operation 80ºC / 176ºF © Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: info@jobevalves.com W

TOPAZ INDUSTRO Parts Identification Sheet Float Assembly Diaphragm Assembly Detach Base Assembly Wing Bolt Extension Slide Float Cord 6g x 10 S/S Screw Frost Pro O’ring Actuator Spring Detach Filter Detach Base Detach Seal 4 TPPI4A0415 Detach Tail 20mm (3/4”) Short TPPI4A0425 Detach Tail 25mm (1”) Short TPPI4A0435 Detach Tail 32mm (1 1/4”) Short TPPI4A0420 Detach Tail 20mm (3/4”) Long TPPI4A0426 Detach Tail 1” npt Short © Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: info@jobevalves.com W: www.jobe