TOPAZ PARTFILL PRODUCT INFO makes and models of rain water harvesting tanks corroding materials • Built in non return valve position using the lock off • Detach™ Valve Seal Access System for quick access to valve seal Available Inlet Sizes All supplied in Detach™ long tail thread with back nut. • The Valve is installed through the side wall of a storage tank. It should be mounted above the overflow level of the tank to prevent backflow. • As the tank empties the weighted float travels down the cord and sits on the bottom stop to activate the valve. • The valve will run until the weighted float lifts clear of the bottom stop. • The float will then rise as rainwater fills the tank and falls as the tank water is used. • The Valve will only function at times when rain fall is insufficient to maintain a water level in the tank above the bottom stop. Pressure Range Part Fill Operating Zone Rain Water Filling Zone .Valve Closes valve Opens Operating Zone Bottom Stop Bottom stop — keeps nylon outlet to cord straight ,— pressure © Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: [email protected] W:

TOPAZ PARTFILL Dimensions & Materials Topaz Dimensions Springs, Bolts, Nuts, Pin, Screws 304 Stainless Steel Santoprene Nitrile HDPE Float Cord Yellow & White Internal Parts (1/2”) Long Tail (3/4”) Long Tail (1” ) Long Tail (1 1/4”) Long Tail Valve Body Detach Seal Maximum Temperature of Operation 45ºC, 115ºF NB: High Temperature models on request. © Jobe Valves P.O Box 17 Matamata New Zealand P: +64 (0)7 880 9090 F: +64 (0)7 880 9099 E: [email protected] W: www.jobe

TOPAZ PARTFILL PArts identification sheet Float, Arm & Stop Assembly Diaphragm Assembly Detach Base Assembly Weighted Float Bottom Stop DESCRIPTION Actuator Cap 6g x 10 S/S Screw Frost Pro Plug Frost Pro O’ring Valve Cap Assembly Damping Spring Bearings (set of two) Actuator Arm 6g x 25 S/S Screw Detach Base Detach Filter Detach Seal TPP4A0420 Detach Tail 20mm (¾’’) Long TPP4A0431 Detach Tail 25mm (1”) Long TPP4A0432 Detach Tail 1” NPT Long TPP4A0441 Detach Tail 32mm (1¼”) Long TPP4A0442 Detach Tail 1¼” NPT Long 5 TPP4A050 Seal Washer 15mm (½’’) Seal Washer 20mm (¾’’) Seal Washer 25mm (1’’) ©...