Junkkari Wood Chippers
8Pages

From environmental care to contracting

We have a new range of manually operated chippers! Infeed chute The new manual infeed chute is lighter and wider than previous models. Its front is fixed, while the back is light and easy to raise up for transportation. Feeding can be controlled easily using the electric buttons located on both sides of the chute. The yellow bar travelling around the chute ensures user safety. Feeding stops immediately when it is touched. Chipper blade disc The blade disc of Junkkari chippers (HJ172, HJ252 and HJ262) is equipped with four knives. Each knife can be adjusted steplessly according to the...

We are speaking from experience Junkkari chippers are based on a blade disc. We have 40 years and more than 10,000 machines of experience in their manufacture. When using a disc chipper, trees are fed towards the disc, which cuts the tree one chip at a time. Trees are fed assisted either by hydraulic feeding rollers or an infeed conveyor. The roller speed adjustment is stepless and easy. From the blade disc, chips fly to blow wings at the outer edge of the disc. Here, chips are crushed and the wings blow woodchips to the desired location through the discharge chute. Simple and effective! ↑...

The G, GT and GTC models are normal tractor-mounted chippers. The difference is that the G model needs to be connected to the tractor via a PTO shaft and electric cables, and its feeding rollers need to be powered by the tractor’s hydraulics. The GT and GTC models are equipped with separate hydraulics, and they do not need any oil from the tractor. Junkkari HJ252 is a new model in the most popular size category! It is also suitable for chipping larger trees of up to 25 cm in diameter. The Junkkari HJ252 chipper, with a feeding angle of 45 degrees, is available as G, GT and GTC models....

The new Junkkari HJ262 differs from other Junkkari models through its direct-feed system. It is a sturdy model mounted on a tractor’s 3-point linkage and suitable for trees of less than 26 cm in diameter. HJ262 is ideal for manufacturing chips for biofuel, parks and playgrounds, and energy. The first-rate chip quality of the direct-feed chipper is also suitable for smaller stokers, as the chipper also cuts wood perpendicular to the grain. The feeding angle is 90 degrees to the disc, unlike in other Junkkari models. The chip size is smaller and the quality is very even, because chips break...

Junkkari HJ320 C Junkkari HJ320 is an effective and compact tractormounted chipper for contractors. Its extremely sturdy frame is equipped with a flange, to which a crane can easily be mounted. The chipper is available with a conventional infeed chute or a feed conveyor. The heavy-duty disc of the HJ320 chipper is equipped with four knives which makes it a highly powerful machine in its size category for contractors. The feeding angle of 60 degrees to the disc reduces the power demand and enables high production. ↑ HJ320 and HJ500 feed conveyor. The 150 cm feed conveyor is also ideal for...

Junkkari HJ500 C Junkkari HJ500 is a high-power trailed chipper for chipping trees of up to 45 cm in diameter. It is excellently suited for contractors and holds its ground against drum chippers in the same size category. A significant advantage of HJ500 is its very low power demand considering its production and its highly competitive price. The feed opening of the HJ500 chipper is in a 45-degree angle in the front of the chipper. The tractor operator has an excellent visibility from the cabin towards the feed opening, so that the chipped material is easy to control and working is smooth...

CHIPPERS MODELS Feed opening size (cm) Blade disc diameter (cm) Blade disc weight (kg) Revolutions (r/min) Maximum tree diameter (cm) Power demand kW (hp) ❶ Weight (kg) Length in working position (cm) Length in transportation position (cm) Width in working position (cm) Width in transportation position (cm) Height in transportation position (cm) Hydraulic feeding device/number of rollers Hydraulic feeding device with own hydraulics Chute extension Brush wood knives for the disc Brush wood knives for the chamber Standard/2 rollers or 1 roller + conveyor -/standard/standard...