Infrared Moisture Analyzer Model FD-660

1 / 2 PagesView full catalog

Infrared Moisture Analyzer Model FD-660

Product catalog summary

Specifications

Measurement Method: Detection of weight loss by heating and drying.
Sample Weight: 1 - 80 g.
Resolution: Moisture content/Solid content: 0.1% or 0.01% (selectable); Weight: 0.005 g.
Measurement Units: Moisture content (wet base & dry base), solid content.
Measurable Range: 0 - 100% (wet base, solid content); 0 - 500% (dry base).
Repeatability: 0.1% for samples with a weight of 5 g or more.
Measurement Mode: Automatic and Timed halting modes.
Drying Temperature Range: 30 - 180 °C.
Display: Backlit LCD display.
External Output: RS-232C interface.
Storage of Measurement Conditions: 5 types.
Operating Range: 5 - 40 °C, 85% RH or less.
Heat Source: Organic carbon heater.
Power Supply: 100 - 120 V AC / 220 - 240V AC.
Power Consumption: Max. 900 W.
Dimensions & Weight: 222 x 360 x 196 mm, 3.2 kg.
Sample Dish: Stainless steel, 110 mm in diameter.

Features

Environmentally-Friendly Heater: Organic carbon heater with a service life of 7,000 hours, emitting infrared rays efficiently.
Measurement Modes: Automatic and Timed Halting Modes for appropriate drying conditions.
Data Memory Function: Stores up to 50 sets of measurement data.
User-Friendly Control Panel: LED-equipped for easy operation.
High Performance Balance: Auto taring mechanism for reliable measurement.
Pre Heat Mode: Stabilizes internal temperature for accurate measurements.
Connectivity: Connectable to printer and PC for data output.
Sample Dish Enlargement: Improves drying efficiency and sample representativeness.

Applications

The FD-660 Infrared Moisture Analyzer is suitable for a wide range of applications, including quality control and inspection departments, where moisture content control is essential. It is not suitable for samples that become explosive, flammable, or hazardous when heated.

Additional Information

Contact: Kett Electric Laboratory, Tokyo, Japan.
Quality Management: Conforms to JIS Q 9001, ISO 9001 standards.
Environmental Considerations: Printed using vegetable oil-based ink and recycled paper.

Catalog excerpts

Infrared Moisture Analyzer Model FD-660-1

Specifications Option Measurement Moisture Analyzer Infrared Moisture Analyzer True to the basic o moisture measurement Kelt KETT ELECTRIC LABORATORY Management system enhancement department of the Japanese Standards Association (JSA) registers the Quality Management System of the above organization, with conform to JIS Q 9001, ISO 9001. Design, development and production management, calibration and repair of Moisture testers, NIR composition analyzers, Grain inspectors and Coating thickness testers. LVEGETABLE This document is printed using vegetable oil based ink and recycled paper in WL INK consideration for the environment. To improve the product, specifications and the external appearance may be changed without notice. In addition, please note that due to printing, the product's color may appear different from the actual article. KETT ELECTRIC LABORATORY

Open the catalog to page 1

Infrared Moisture Analyzer Model FD-660-2

Infrared Moisture Analyzer FD-660 The service life is 7,000 hours* which is approximately 4 times the life of a comparable conventional infrared lamp. This heater emits infrared rays more than 2 times stronger than general halogen heaters with which other infrared moisture content measuring instruments are equipped in the wavelength range (2.5 to 3μm) in which moisture reacts to heat. This allows for efficient drying. * Indicates actual measured time for the operation of infrared heater. This is not a guarantee of service life. • Environmentally-friendly organic carbon heater Highly efficient...

Open the catalog to page 2