• Available with single or double skin shell.
• Cutting widths range from 1.00m to 3.00m.
• Options for manual or hydraulic side shift.
• Can be mounted on the front or rear of a tractor.
• Operates in line, left, or right side working positions.
• Features include a fixed hood or adjustable rear door, large diameter rear roller, side skids, spherical rotor bearings, and whale tail forged flails.
• Equipped with simple belt adjustment, Kevlar banded notched drive belts, and a drive line overrun clutch.

• Available in cut widths of 1.5m, 1.8m, 2.4m, and 2.7m with inline and offset cutting positions.
• Three position bolt-on headstock for offset or in-line operation.
• Twin timed gearbox drive with Comer gearboxes.
• Free swinging blades to reduce shock loads on the gearbox.
• Streamlined design to prevent debris build-up and water trapping.
• Special parabolic skids to minimize field marking.
• Easy hitch-up with no top link required.
• Unique lower link flotation for close ground following.
• Adjustable cutting height from 60mm to 200mm.

• Three point linkage for front or rear mounting.
• Overlapping blades with mulching blades for fine cut mulch.
• Spreads chopped residue evenly.
• 1000rpm PTO for tractors from 65hp.
• All cutting widths fit within 2.89m transport width.
• Low horsepower requirement.
• Mulching plates and hardened swinging blades.
• Options for two, three, four, or six cutting and mulching blades.

Kidd Farm Machinery Ltd, Folly Road, Roundway, Devizes, Wiltshire, SN10 2HT, UK. Phone: +44 (0)1380 726085, Fax: +44 (0) 870 928 9552, Email: [email protected], Website: www.kiddltd.com