Pressures Per agricultural tyres KLEBER

Product catalog summary

Overview: This document provides technical guidelines and specifications for the inflation pressures of agricultural tyres, emphasizing the importance of correct tyre pressure for optimal performance and safety.

Specifications: The document includes detailed load/pressure tables for various tyre models and sizes, indicating the maximum load capacity at different pressures and speeds. These tables are crucial for ensuring the tyres are inflated correctly according to the manufacturer's deflection allowances.

Procedures: It is recommended to periodically check and adjust tyre pressures to compensate for any air loss. The document also advises replacing rubber valves or seals during tyre replacement to maintain integrity.

Recommendations: For safety, tyre fitting and inflation should be performed by trained professionals using appropriate tools. The document also discusses the use of liquid ballasting to improve machine performance by adding weight to drive axles, with specific instructions on how to safely implement this method.

Important Notes: Incorrect tyre pressure can lead to unsatisfactory performance, damage, or uneven wear. The document stresses the importance of adhering to the manufacturer's instructions and the procedural recommendations of the European Tyre Industry Authorities.

Liquid Ballasting: This section provides guidelines for adding liquid ballast to tyres, including precautions against corrosion and freezing, and the necessity of regular pressure checks.

Catalog excerpts

Pressures Per agricultural tyres KLEBER-1

KLEBER GRIPKER Peace of mind, every time KLEBER FITKER Pressures (bar) & Max.load (kg) per Tyre - Take into account the load and type of work when adjusting pressures Pressures are given in bars, loads given in kg. To obtain load per tyre you should weigh the tractor with the implement attached and raised, per drive axles, and divide per 2. Pressures Per agricultural tyres KLEBER 40 Pressures (bar) & Max.load (kg) per Tyre - Take into account the load and type of work when adjusting pressures Use the technical documentation and inflation tables which show the load/pressure figures for different operating speeds. These load/pressure tables correspond to the tyre deflection allowed by the manufacturer. If the pressure is incorrect, the tyre is either under or over inflated, which can cause: - either unsatisfactory performance in the field (grip/load capacity) or unsatisfactory road holding leading to a loss of control; - or damage (premature casing fatigue) - or uneven wear that may reduce the life of the tyre. 30 40 Pressures (bar) & Max.load (kg) per Tyre - Take into account the load and type of work when adjusting pressures Pressures (bar) & Max.load (kg) per Tyre - Take into account the load and type of work when adjusting pressures Apart from correct initial inflation it is also recommended that the pressure be checked periodically and corrected if any air has been lost. 30 40 We recommend replacing the rubber valve or the seals on the metal at each tyre replacement. The above details are subject to modification after publication (May 2012) Peace of mind, every time KLEBER TOPKER High volume

Open the catalog to page 1

Pressures Per agricultural tyres KLEBER-2

KLEBER TRAKER Standard multi-purpose Pressures (bar) & Max.load (kg) per Tyre - Take into account the load and type of work when adjusting pressures KLEBER SUPER VIGNE*** Standard specialized Pressures (bar) & Max.load (kg) per Tyre - Take into account the load and type of work when adjusting pressures KLEBER SUPER VIGNE* 40 30 km/h : Ploughing, heavy draft work and road travel, for long distances +0.3 bar. 40 km/h and 50 km/h : Road transport, for frequent or long journeys with semi-trailer +0.3 bar. IMPORTANT NOTE: To weigh load by tyre, it is necessary to weigh the axles of the normally laden...

Open the catalog to page 2

All Kleber catalogs and technical brochures

NEW KLEBER Topker
2 Pages
KLEBER Topker IF
4 Pages