■ variable dimensions at millimetre intervals ■ minimum installation depth 290 mm Housing ■ galvanised steel construction ■ optional enclosed housing with access for inspection ■ optional liquid paint in all RAL colours ■ Purge section available in two sizes (2.5 or 5°) i Stepper motor system, control unit with analogue and Modbus interface Storage mass types ■ Type P Condensation, aluminium storage mass (standard) Epoxy-coated storage mass (corrosion protection) Hybrid storage mass zeolite / aluminium (increased moisture transfer) Zeolite-coated storage mass (maximum moisture transfer) i optional three-phase asynchronous motors (with control unit for variable speeds or used as constant drive) ■ Brush seal (standard) energy recovery our passion energy recovery our passion

Safe lifting - certified Flush housing TÜV-certified construction with The absence of any protrusions due to screw/rivet heads or safe anchor points sheet metal edges ensures positive-locking installation and perfect sealing. 25mm edging provides sufficient contact Air is our element energy recovery our passion 50 mm wheel-frame difference With housing dimensions of 600 to 2550 mm, the distance between the storage mass and housing is just 50mm, and this with a minimum installation depth of just 290 mm. This means: more power and less pressure loss with the same cross-sectional area in the air...