The Komatsu 931XC is a powerhouse offering considerable stability and low ground pressure. With eight wheels, operator comfort is high, ground damage is reduced and manoeuvrability is excellent in steep terrain. Dimensions (eight-wheeler with 600 mm tyres) A. Width 2,776 mm B. Length, total 8,015 mm C. Length, front axle to middle joint 1,930 mm D. Length, middle joint to rear axle 2,150 mm E. Transport height, with tire compression 3,945 mm F NOTE: Stated dimensions are nominal and may vary slightly depending on production tolerances and choice of equipment. Weight Curb weight: Engine type: Stroke volume: Power, max.: Torque: AdBlue® tank: Fuel tank: AGCO POWER, 6-cylinder diesel engine with turbo and intercooler. Conforms to the requirements of EU Stage V (Europe), Tier 4F (North America) and Stage II (other countries). Stage V: 74 LFTN-D5, Tier 4F: 74 LFTN-D4, Stage II: 74 LFEN-A2 7.4 l Stage V, Tier 4F and Stage II: 190 kW DIN at 1,850 rpm, MAR-1: 193 kW DIN at 1,950 rpm Stage V, Tier 4F and Stage II: 1,130 Nm at 1,500 rpm. MAR-1: 1,000 Nm at 1,500 rpm 42 l approx. 480 l Axle, front: Axle, rear: Brake system Driving brake: Working brake: Parking brake: Power transmission Differential locks: Driving speed: Tractive force: Hydrostatic-mechanical, controlled via MaxiXT. Transfer gearbox with 2 positions. Disengageable front-wheel drive. Front and rear axle. Mechanical electro-hydraulic control. 0 - approx. 20 km/h 200 kN Geared bogie "hi clearance" type with portal axles housed in the rims. Differential with mechanical differential lock. Suspended geared bogie type “hi clearance” with portal axles housed in the rims. Differential with mechanical differential lock. Hydraulic stabiliser. Braking performance: Fully-hydraulic multi-disc brakes. Brake pressure accumulators charged via automatic hydraulic accumulator charging valve. Four multi-disc brakes in oil bath acting on front and rear axles. Same as driving brake. Automatically engaged when working. Spring-action brake with electro-hydraulic control. Emergency brake. Conforms to ISO 11169 and VVFS 2003:27. Crane Reach: Lifting torque, gross: Slewing torque, gross: Head: Hydraulic system Flow: System pressure: Hydraulic oil tank: Other: Working hydraulics have dual-circuit loadsensing system with variable piston pumps. 528 l/min. at 1,600 rpm 280 bar approx. 220 l Pressure filter for hydrostatic circuit. Return oil filter for hydrostatic and working hydraulics. Hydraulic oil level warning. Joystick steering: Electric steering: Steering angle: Ex. of other equipment: Hydraulic articulated joint with 2 dual-acting hydraulic cylinders. Load-sensing (LS) proportional steering from crane controls/rocker. Finger-controlled miniature steering wheel on right-hand panel. +/- 40° Electrical limit dampi

931XC Harvester Head Weight, from: Felling/cutting diameter: Feed rate: Feed force, gross: Opening, front knives, max.: Roller opening, max.: *depends on saw bar **depends on engine Electrical system Voltage: Battery capacity: Alternator: MaxiXT control and information system 24 V 2 x 180 Ah 2 x 100 A Lighting Working lights: Service lighting: Ex. of other equipment: 13 lights on cab, 2 lights on crane, 3 lights on crane base, all halogen, and 2 lights on the engine hood grille, LED LED lights in service compartments. Working lights (LED). 9 lights on cab, 2 lights on crane, 3 lights on crane...