The Komatsu 825TX is a powerful yet compact thinning specialist. Its low weight, mobility and strength are just a few of the factors that help to ensure dependable productivity. Dimensions (eight-wheeler with shortest rear frame option and 600 mm tyres) A. Width 2,600 mm B. Length, total 9,380 mm C. Length, front axle to articulated joint 1,900 mm (2,150 mm with tracking frame) D. Length, articulated joint to rear axle 2,900 mm (2,650 mm with tracking frame) E. Transport height, with hoses and tyre compression 3,800 mm F. Ground clearance, at steering coupling 580 mm NOTE: Stated dimensions are nominal and may vary depending on production tolerances and optional equipment. Weight Weight, from: Engine displacement: Power, max.: Torque: Fuel tank: AdBlue® tank: Ex. of other equipment: AGCO POWER 4.9 l. 4-cylinder diesel engine with turbo and intercooler. EU Stage V (Europe) and EPA Tier 4F (North America). 4.9 litres 127 kW DIN at 1,800 rpm 750 Nm at 1,500 rpm 145 l 14 litres (when refuelling) Water separator. Fuel filter. Throttle, electrical via CAN. Thermostat-controlled fan (electric). Electrical refuelling. Driving speed: Tractive force: Flow: Hydraulic oil tank: Other: Brake system Driving brake/ Working brake: Parking brake: Braking performance: Computer-controlled, hydrostatic mechanical transmission. Direction of travel and driving speed are controlled via a keypad on the armrest as well as foot-operated forward/ reverse controls in the working position. Transfer gearbox with 2 positions (high and low). Disengageable drive operation. 0–approx. 25 km/h 150 kN Front and rear axles: Fully-hydraulic multi-disc brakes. Hydraulic accumulator charging valve. Multi-disc brakes in oil bath. Automatically engaged when working. Spring-action brake with electro-hydraulic control. Emergency brake. Conforms to ISO 11169 and VVFS 2003:17. Frame/Axles Three rear frame options. Rear frame with smooth V-shaped bottom made of high-strength steel. Geared bogie with hub reduction. Differential with mechanical differential lock. Internal multi-disc wet brakes. Damping bogie stops. Tracking frame. Front blade. Stabiliser. Towing points front and rear. Bogie lift. Comfort bogie. Extra sealing on articulated frame. Single-circuit load-sensing with variable piston pump. 280 l/min at 2,000 rpm 128 l Dual return oil filters for hydrostat and working hydraulics. Hydraulic oil level warning. Sight glass level check. Clogging indication for return oil filter. Visual alarm in cab. Windows: Heating/ventilation: Noise level: Vibrations: Other: Tested in accordance with applicable ISO standard. Spacious and bright with very good visibility. Thermal and acoustic insulation. Several alternative seat options. Ergonomically designed with headrest, armrests, joystick panels and waist safety belt. Depending on seat selection, different options are available for individual adjustment of the seat cushion, backrest and lumbar support. Seat column with 0–180° working range. Polycarbonate windows throughout. Fully automatic heating and cooling unit, ACC. Filtered intake air. In compliance with ISO standard In compliance with ISO standard Windscreen wipers and washers on front and rear windows. Acceleration pedal, electric via CAN, in transport mode and crane mode. Inside rear-view mir

• Komatsu Comfort Ride (cab suspension) • Radio with Bluetooth and hands-free support • Seat column with 220° working range • MediaZone Load area Gross load: Bunk area: Load bunks: Load gate: 9,000 kg 3.9 m2 Mounted on runners, movable. Komatsu Thinning Gate (machine with tracking frame). Komatsu FlexGate (hydraulically flexible full-height gate, fixed or hydraulically adjustable design). Komatsu Thinning Bunks. Komatsu 105 F 7.7/9.5/10 m 103 kNm 28.7 kNm G121 and slew dampened link MPB Komatsu G28 ProTec (standard) Alternative models of grapples and rotators. Joystick steering: Steering angle:...