Farnax Plus

Product catalog summary

Overview: Farnax Plus is a water treatment solution designed to ensure continuous biofilm-free and safe drinking water. It addresses both water disinfection and biofilm removal, effectively killing persistent spores and oocysts.

Causes of Water Contamination: The document identifies two main sources of microbiological contamination: source-borne infections (contamination of the water source or storage tank) and system-bound contaminations (contaminations in the pipe network due to biofilm).

How Farnax Plus Works: Farnax Plus operates in two phases: a liquid phase that kills free bacteria in the water, and a gas phase that penetrates and removes biofilm and mineral deposits. This dual-phase approach ensures thorough cleaning without the risk of clogging pipes.

Additional Benefits: Farnax Plus neutralizes taste and odor abnormalities by destroying phenolic compounds, which are often caused by algae and decaying plant material.

Usage Instructions: To activate Farnax Plus, mix the contents of the small bottle (Farnax Plus B) with the drum (Farnax Plus A). The solution is stable for 30 days at ambient temperatures (15-25°C). For cleaning waterlines in empty houses, use 1-2L of Farnax Plus per 100L of water with a 2-hour contact time. For continuous use in drinking water, the recommended dose is 50 to 150 ml per 1000L of water, with higher doses up to 300 ml possible.

Monitoring and Optimization: The KONAX® CONNECTOR provides online and real-time monitoring to optimize water treatments, ensuring continuity of water disinfection and monitoring water consumption.

Contact Information: The producer and responsible publisher is located at Hondekensmolenstraat 56, 8870 Izegem, Belgium. For more information, visit www.konax.com or www.farnax.pro.

Catalog excerpts

FARNAX PLUS Continuous biofilm-free and safe drinking water • Water disinfection • Biofilm removal • Killing persistent spores and oocysts

Open the catalog to page 1

Water ... where is the problem? Broadly speaking, the causes of microbiological contamination of water can be divided into 2 groups: • Source-borne infections (= infections of the water source or storage tank) System-bound contaminations (= contaminations in the pipe network) If we are dealing with “system-bound” contaminations, the cause is linked to the biofilm built up on the inside of the water lines (and tanks, filters,...). HOW DOES FARNAX PLUS WORK? The effect of Farnax Plus focuses on treating the water source as well as addressing and preventing biofilm in water lines. Farnax Plus is...

Open the catalog to page 2

IN PRACTICE Konax Connector Watermeter with puls 1/L or 1/10L Dosing pump injection line injection valve KONAX suction lance with low and empty signal activated water disinfectant Stable for 30 days after obtain stable bottle of Farnax Plus Farnax Plus B to the drum of Farnax Plus A. REGISTERED BIOCIDE WITHIN CLASSES PT4 AND PT5: • For cleaning waterlines in empty houses (PT4): dose 1 - 2L Farnax Plus / 100 L water and respect 2 hours contact time before flushing the lines. • Continuous use in drinking water (PT5). Dose 50 to 150 ml/ 1000 L water. Higher doses possible up to 300 ml/ 1000 L of...

Open the catalog to page 3

KONAX® CONNECTOROnline and real-time monitoringAn essential tool to optimize your water treatments • 1. Guarantee of continuity of water disinfection. • 2. Monitoring of water consumption Producer and responsible publisher: Hondekensmolenstraat 56 - 8870 Izegem - Belgium T: +32 51 31 43 93 - [email protected] www.konax.com - www.farnax.pro

Open the catalog to page 4

All Konax catalogs and technical brochures

Konax Connector
2 Pages
Konax Agridos-range
4 Pages