Mechanical Grain Conveying Efficient Mechanical Conveying Solutions

Compact drive solution with bevel gear motor. Elevator boot inlet. Tension of the bucket is easily done by adjusting the pulley at the elevator boot. Access to elevator boot emptying. KBE bucket elevators are used for energy-efficient and gentle vertical conveying of grain etc. up to 25 m with capacities between 20-120 tonnes per hour. • Modular system with easy extension to the desired conveying height. • Weather-proof galvanized surfaces. • High efficiency bevel gear motor with minimal space requirement. • Shuttered inlet. • Belt tightening at elevator boot. • Cleaning hatch in elevator boot....

Technical specifications

KCC Chain Conveyors KCC chain conveyors are used for horizontal conveying of grain and can be built in lengths of up to 50 m. Conveying • Quick and easy assembly for different conveying distances using standard modular system of extensions. • All modules are made from galvanized steel. • Suitable for outdoor installation. • The conveyor is supplied with a 10 mm PEHD-reinforced base. • High efficiency bevel gear motor with minimal space requirements. • Overflow flap with switch on drive unit. • Cleaning buckets with carriers every approx. 2m chain. • Extensions with side inlet for installation...

Return section with equipment for tensioning of conveying chain. Drive section with outlet and overflow. Conveying chain is fitted as standard Intermediate outlet fitted in the with cleaning buckets. conveyor base. Operated manually or Length of drive and tensioning section, m 1,0

KCA Chain Conveyor KCA chain conveyors are used for conveying of grain when inclined conveying up to 45° is needed. • Wide range of standard extension modules. • Galvanized external conveyor surfaces. • Suitable for outdoor installation. • Bevel gear motor means high efficiency and easy installation. • Low noise levels thanks to PEHD carriers on the conveyor chain. • Overall length up to 50 m, depending on layout and capacity. • Extensions with side inlet for horizontal installation in grain pit. Our standard range of straight extensions and angle pieces provides easy solutions to both horizontal...

Motorized intermediate outlet. Drive unit with tensioning section with outlet connected to KBE inlet. KCA chain conveyor with angle section from inclined to horizontal conveying. Chain conveyor mounted on silo roof. Rain cover for bevel gear motor. Technical specifications Material thickness extensions, mm Chain speed, m/sec Drive unit with chain tensioner

BCB Belt Conveyors BCB belt conveyors are used for horizontal or inclined conveying of grain up to 15°. The capacity is up to 80 t/h over 100 m. Capacity is reduced at inclined conveying. • Modular system that provides flexible solutions based on standard components. • Self-cleaning conveying. • Belt conveyor for 60 and 80 t/hour is galvanized for outdoor installation. • One-way or two-way conveying. • Infinite discharge points. • Discharge unit, that can be moved lengthwise along the conveyor belt, for discharge on both sides of the belt. • Inlet that can be run on the conveyor. • Cover and...

Technical specifications Standard extensions, m Belt support Dimension drive rollers 0, mm Maximum length, m Transmission Motor power, kW Gear motor

CFG Chain Elevators The CFG chain elevator is an excellent solution for conveying capacity requirements of 20-40 t/h. CFG chain elevator can be adjusted for conveying at all inclinations from horizontal to vertical. • Trough inlets. • Side auger connected to elevator boot. • Side auger with motor at elevator boot. • Motor in end of side auger. • Closed elevator base, inlet on downpipe shaft. • Flexible modular system which offers many options for conveying solutions. • Single motor for horizontal and vertical conveying. • Galvanised surfaces for outdoor installation. • Gear motor or belt drive....

Side auger with gear motor connected to the elevator boot. Extensions with side inlet to CFG chain Chain elevator with 45° angle. Drive elevator/conveyor. section with belt drive. Chain elevators for horizontal and vertical conveying. Side inlets for horizontal section. Technical specifications

CFG Chain Elevators Angle Elevator The angle elevator (angleveyor) provides the perfect solution, if you need a conveyor to work both horizontally and vertically. • Needs only connection to a single motor. • Inlets are fitted to the elevator shaft on the downpipe side, either at the rear or on the sides. • Compact solution for filling storage e.g. silos. • Optional gear or belt drives. Length of motor drive at elevator boot, closed trough, m 18

Intermediate outlet with rack and Intermediate bearings are standard in Intermediate outlet for manual pinion for control using cord drive. each extension connector. control. Trough augers are the most economical solutions for horizontal conveying. DTA trough augers convey up to 30 t/h over a distance of up to 20m. • Screw shaft is mounted on bearings, so wear on the auger is avoided during idling. • Many solutions using standard components. • Closed trough as standard. • Conveys in both directions. • Multiple inlets can be fitted to the same unit. • Multiple outlets can be fitted to the same...

DGS / DGA / DGC Grain Augers These augers are economical solutions for grain conveying and can be fitted at any angle, horizontal or vertical. Conveying capacity up to 90 t/h. The smaller sizes are highly mobile. Kongskilde offers • DGA 102, DGA 127 and DGA 152 with belt drive and motor mounted at auger outlet. • DGC 102, DGC 127 and DGC 152 with inlet hopper, wheeled stand and motor mounted at inlet. • DGS 205 and DGS 254 with galvanized surfaces. • DGS 205 grain cannon version with belt drive. Motor and belt drive are mounted at the auger’s outlet (easy to fit wheeled stand). • Range of connectors...