Multi Jet/Combi Jet is a load carrying high capacity machine with pneumatic transport of seed and fertiliser to the coulters. Multi Jet and Combi Jet are available with 4, 6 and 8 meter working width. Together with the Multi Flex board in the front and the consolidating rubber wheels for the entire working width, sowing in many conditions can take place directly after the plough or the stubble cultivator. The power requirement for Multi Jet / Combi Jet is low compared to the performance of work. That benefits in lower tractor cost and less compaction due to less tractor weight. The machine consists...

Vario-K gearboxes controlled by K-Tronic offer possibilities to control the application rates while on the go. K-Tronic offers possibilities to control application rates from the driver’s seat while on the go. The K-Tronic offers possibilities to control the seed rate from the driver’s seat while on the move. On dry patches and in rough structure the seed rate can be increased, whereas in wet hollows, the seed rate can be reduced with K-Tronic in three steps, each of 10 %. Being able to reduce the seed rate in parts of the field where the crop would otherwise have been too dense implies major...

Combi Jet 4504 is built on well proven principals for best possible seed placement. The strong coulter assembly with good clearance together with the possibility to mount the Multi Flex system and full width tyre packers in front of the coulters, give the option to cultivate, reconfirm, fertilise and seed in the same go. The machine above is equipped with optional grass seed box for simultaneous shallow grass establishment. Combi Jet Combi Jet has 4, 6 or 8 m. working width and a total hopper capacity of 4500 or 5400 litres. Hydraulic folding of the coulter assembly to 3 m. transport width makes transportation...

Combi Jet 5406 equipped with Multi Flex system, Full width tyre packer, light following harrow and pre emergence marker, incorporates seedbed preparation, consolidation, fertiliser placement and seeding in one go. All Combi Jet models can also be delivered in disc coulter version for conditions with crop residues. The new design of the Combi Jet is directed to more effective operation. All adjustments of hydraulics, application rates, calibration test etc are concentrated to the left hand side of the machine. The new Vario-K gear boxes for adjustment of application rates are equipped with plain...

Multi Jet 3706 base machine is a load carrying seed drill with low power demand. High drilling capacity can be achieved with a 100 hp tractor. Six metre working width and hopper capacity for more than 15 ha wheat gives high output. Multi Jet is available with 4, 6 or 8 m. working width. The 4- and 6-metre models have 3700 litre hopper capacity, and the larger 8-metre model has 4600 litre hopper capacity. All adjustments of hydraulics, application rates, calibration test etc are concentrated to the left hand side of the machine, resulting in less set-up time and better efficiency. The new Vario-K...

The Multi Jet 4608 Disc is developed to drill also in conditions with large amounts of crop residues. The spring loaded disc coulter is followed by a pressure wheel consolidating over the seed row, and at the same time keeping the maximum working depth of the coulter. The disc coulter on Multi Jet Disc is designed to drill in all types of cultivated soil. Stubble cultivated soil with chopped straw and stubble residues on the surface, as well as ploughed conditions. The scalloped disc ensures safe rolling without stop in both heavy straw and in light soil. The disc is made from 3-mm thick hardened...

* with disc coulters Technical specifications Equipment • = standard equip. x = extra equip. - = not available Subject to alternative changes reserved