KDC 8000
4Pages

{{requestButtons}}

Catalog excerpts

KDC 8000 - 1

Kongskilde Dual Cleaner KDC 8000 Moving agriculture ahead

Open the catalog to page 1
KDC 8000 - 2

Foreign impurities removed from wheat. New strong design on screen rotor. Diagonals reduces stress load on the screens. KDC 8000 cleaner is a dual cleaner with both a screen cleaning function for size separation and an aspirator function for removing of dust and light impurities. • Capacity in pre cleaning up to 80t/h • All components exposed to the ambient made in galvanized steel for outdoor installation. • Quick release system is securing easy and fast replacing of screens. • Wear spots on FK 250 inlet made of stainless steel bottom. • Only rotating parts – no vibrations transmitted. Two...

Open the catalog to page 2
KDC 8000 - 3

Screenings is conveyed through pipes up to15m away. Drum drive Panel for start and stop of motors in sequence, only one power supply wire is required. Auger drive Screen drum Unit 50 Hz Motor size Motor size Motor size Power supply Inner drum Outer drum Screen area’s Wear resistant inlet made of heavy stainless steel. Control panel Access door for easy collection of grain sample after cleaning. Connections for material flow Inlet for crop Outlet for cleaned crop Conveying line for impurities General advice concerning capacity and selection of screens: The inner screen separates the large...

Open the catalog to page 3
KDC 8000 - 4

Inner screen Screen choice Screen sections Screen Perforation in Sections (mm) 1–2–3–4-5 Max. cleaning eff. reduced capacity Maize (Corn) Soya beans Rape seed Soya beans Rape seed Outer screen Screen choice Screen sections Kernel’ size Small Middle Large Maize (Corn) oblong holes 1,2 x 16,5 oblong holes 1,8 x 20,0 oblong holes 2,0 x 16,5 oblong holes 2,25 x 16,5 oblong holes 2,4 x 20,0 oblong holes 2,5 x 16,5 oblong holes 2,65 x 16,5 oblong holes 4,0 x 16,5 oblong holes 4,3 x 16,5 Subject to alternative changes reserved oblong holes 4,5 x 16,5 oblong holes 5,0 x 20,0 square holes 2,75...

Open the catalog to page 4

All KONGSKILDE Industries A/S catalogs and technical brochures

  1. Rotavator

    6 Pages

  2. Tedders

    8 Pages

  3. Clean cut 2021

    20 Pages

  4. COMBI JET

    8 Pages

  5. FLEXI DRILL

    4 Pages

  6. MULTI JET

    8 Pages

  7. DELTA FLEX

    8 Pages

  8. ÖVERUM CT-F

    2 Pages

  9. FAN GUARD

    2 Pages

  10. R+ 1610

    8 Pages

  11. R+ 2 ROTORS

    8 Pages

Archived catalogs

  1. Clean cut 2016

    20 Pages