Trailed forage harvesters 2016
12Pages

Trailed forage harvesters

Precision chopping The grass sap and possible additives will be evenly distributed on all surfaces. The process of ensiling starts earlier and the quality will be better. ● Often the surface of the swath is dry and the bottom wet. The precision chop forage harvester will mix top and bottom so that the ensiling material will be completely homogeneous. This prevents mildew spots in the silage are avoided and thus bad quality silage is avoided. W hen the crop has been precision chopped it is easier to compress to a higher density. When the silage contains less air, the process of ensiling is...

Upper Cut on forage harvesters from JF ● T he unique Upper Cut system from JF cuts the crop at the shearbar and throws it directly into the chute. Thereby friction between the knives and rotor housing is avoided which means that the Upper Cut rotor provides a 25-50% increase in capacity compared to similar precision choppers with the same tractor. The new JF cutting rotor in the FCT 60s is heavier and designed to draw in more air. ● U pper Cut Low fuel consumption. ● The FCT60 models feature a brand new cutting rotor, the result of much field testing. It is a new construction designed to a...

FCT 960 ProTec and FCT 1060 ProTec 2 Machines – many advantages ● roTec means high protection. P ProTec is a designation to FCT 960/1060 which explains that the machine is secured against possible foreign matter. In the transmission there is a friction clutch, which releases in case of high or sudden overload, for instance if a large object is on its way into the machine. All gears and chains are hardened which gives a considerably longer life. ● he reverse system of the powerful T type from the larger models is now standard on FCT 960/1060 ProTec. This implies transmission of sufficient...

Options for FCT 960/1060 Features: ● achines with metal detector are M all equipped with one set of feed rollers made of demagnetized material. In front of the rollers there is a magnetic field that will be actuated if a metal object gets near – this releases a stop pawl. The stop pawl will stop the feeding immediately, so that the metal object will not reach the chopping rotor. Benefits: ● hereby you protect not only your T machine but also your cows! N o loss of power to keep up the capacity and thereby keep the low fuel consumption. E asier to operate and fill up the wagon, thereby...

Easy operation with only one controller Options Electro hydraulic control box for FCT 1060. Reversing of feed in and pick-up. Turn on the feed in and pick-up Hydraulic control of the drawbar Reversing of feed in and pick-up.

FCT 1460 Standard with metal detector Option: Foldable Chute Double deflector Cutting length can be adjusted between 6-32 mm Different working positions are possible thanks to the strong swivel gearbox and drive line The optional Auto Hitch makes it possible to work with CTF Wide wheels for better weight distribution Metal detector Options: Pick-up wheels 3.10 m wide pick-up

FCT 1360 and 1460 are JF’s latest high-capacity forage harvesters. These machines have a very strong but simple transmission and a very powerful feed intake. The result is a forage harvester with minimum maintenance and few repairs. Features: ● he FCT 1360 has a drive shaft and T a gearbox driven feed intake. ● eed intake width is increased F by 20% compared to FCT 1060, it means you get the best obtained result and optimal utilization of the 5-row cutting rotor which is standard on FCT 1360 and 1460. ● Wide pick-up of 3.10 m Benefits: ● he power is distributed to the T feed rollers by PTO...

Electro hydraulic controller. FCT 1360 and 1460 are fully controlled by electro hydraulic functions. Only 1 DA oil outlet is required to operate the machines: ● ontrol of drawbar C ● Reverse the feed roller direction Metal detector. ● urning the chute T ● Control of chute double deflector ● Auto Hitch (Option) Features: ● he feed intake and the 5-row T cutting rotor are similar to FCT 1360. The difference is the feed roller transmission on FCT 1460 which is newly developed to resist the big challenge if foreign objects are stopping the transmission. Further it has more cutting length...

Extension for chute (equipment) Extension for chute (equipment) Connection and disconnection of trailer The automatic trailer pick up hitch is hydraulically released with the comfortable joystick. All FCT machines can be equipped with Auto Hitch. For more ripe maize we recommend a special serrated shearbar which crushes the maize kernels. Furthermore it is possible to obtain cutting lengths of 6 and 12 mm. 2-row maize unit is available for 960/1060 and 3-row for 1360. For direct harvesting of grass and whole crop or the like a 2.4 m disc cutter bar is available. This cutter bar allows you...

Technical data PTO-type, standard Rotor width Cutting length, theoretical (mm) Maize unit Metal detector Wheel standard Reverse mechanism Weight (with pick-up) Rotor width Cutting length, theoretical (mm) Maize unit Wheel standard Reverse mechanism Weight (with pick-up) Metal detector

Subject to change without notice. 300007370 EXP/GB/FCT 960-1460/BRO/1113 Kongskilde Industries A/S Linde Allé 7 • Postbox 180 6400 Sønderborg • Denmark Phone: (+45) 74 12 52 52 • www.