Trailed forage harvesters
12Pages

Trailed forage harvesters Trailed forage harvesters FCT 1060 / FCT 1260 FCT 1360 / FCT 1460 Moving agriculture ahead

Precision chopping The grass sap and possible additives will be evenly distributed on all urfaces. The process of ensiling s starts earlier and the quality will be better. ● Often the surface of the swath is dry nd the bottom wet. The precision a chop forage harvester will mix top and bottom so that the ensiling material will be completely homogeneous. This prevents mildew spots in the silage are avoided and thus bad quality silage is avoided. W hen the crop has been precision chopped it is easier to compress to a higher density. When the silage contains less air, the process of ensiling is...

Upper Cut on forage harvesters from Kongskilde ● T he unique Upper Cut system from Kongskilde cuts the crop at the shearbar and throws it directly into the chute. Thereby friction between the knives and rotor housing is avoided which means that the Upper Cut rotor provides a 25-50% increase in capacity compared to similar precision choppers with the same tractor. The new Kongskilde cutting rotor in the FCT 60s is heavier and designed to draw in more air. ● U pper Cut Low fuel consumption. ● The FCT60 models feature a brand new cutting rotor, the result of much field testing. It is a new...

FCT 1060 ProTec – many advantages ● roTec means high protection. P roTec is a designation to FCT 1060 P which explains that the machine is secured against possible foreign matter. In the transmission there is a friction clutch, which releases in case of high or sudden overload, for instance if a large object is on its way into the machine. All gears and chains are hardened which gives a considerably longer life. ● he reverse system of the powerful T type from the larger models is now standard on FCT 1060 ProTec. This implies transmission of sufficient power if it is necessary to reverse due...

Options for FCT 1060 Features: ● achines with metal detector are M all equipped with one set of feed rollers made of demagnetized material. In front of the rollers there is a magnetic field that will be actuated if a metal object gets near – this releases a stop pawl. The stop pawl will stop the feeding immediately, so that the metal object will not reach the chopping rotor. Benefits: ● hereby you protect not only your T machine but also your cows! N o loss of power to keep up the capacity and thereby keep the low fuel consumption. E asier to operate and fill up the wagon, thereby increased...

Easy operation with only one controller Options Electro hydraulic control box for FCT 1060. Reversing of feed in and pick-up. Turn on the feed in and pick-up Hydraulic control of the drawbar Reversing of feed in and pick-up.

FCT 1260/1360/1460 - high end forage harvesters Option: Foldable Chute Double deflector Cutting length can be adjusted between 6-32 mm Different working positions are possible thanks to the strong swivel gearbox and drive line The optional Auto Hitch makes it possible to work with CTF Wide wheels for better weight distribution Option of metal detektor Options: Side mounted support wheel HD Wide pick-up

FCT 1260, 1360 and 1460 are Kongskilde’s latest high-capacity forage harvesters. These machines have a very strong but simple transmission and a very powerful feed intake. The result is a forage harvester with minimum maintenance and few repairs. Features: ● he machines have wide feed T intake and a large opening between. It means that you obtain the best possible utilization of the rotor width and chopping. require less maintenance and power. ● T his working width enables it to pick up a swath in full width after e.g. the biggest rotary rake or the GXT with collector. ● Wide pick-up of 2,5...

Electro hydraulic controller. FCT 1260, 1360 and 1460 are fully controlled by electro hydraulic functions. Only 1 DA oil outlet is required to operate the machines: ● ontrol of drawbar C ● Reverse the feed roller direction Metal detector. ● urning the chute T ● Control of chute double deflector ● Auto Hitch (Option) Features: ● he feed intake is driven via the T feedroller gearbox. If the fct is equipped with metal detector the stop blocks the transmission and the foreign objects is stopped form entering into the chopping rotor. With the transmission drive the daily manitenance is low and...

Extension for chute (equipment) Folding chute Connection and disconnection of trailer The automatic trailer pick up hitch is hydraulically released with the comfortable joystick. All FCT machines can be equipped with Auto Hitch.

Technical data PTO-type, standard Rotor width Cutting length, theoretical (mm) Metal detector Wheel standard Machine control Weight (with pick-up) PTO-type, standard Rotor width Number of knives Cutting length, theoretical (mm) Metal detector Wheel standard Wheel alternative Machine control Weight (with pick-up)

300007370 EXP/GB/FCT 960-1460/BRO/1017 Subject to change without notice. Kongskilde Agriculture Tel. +45 61 80 50 00 office@kongskilde.com www.kongskilde.com Moving agriculture ahead