VIBRO TILL 8200 SF
12Pages

Cultivators, Vertical Tillage and Rock Picker

Kongskilde has for many years been well known as a manufacture of "S" tine cultivators designed to prepare a quality seedbed and provide for higher yields. The secret v'brating tines are on a true 4'' tine pattern. The "S" tine design ensures depth accuracy. The stirring vibrations provides for a good homogeneous blanket of soil on the seed zone. This layer, on a firm base created by the "S" tines, allows for a good seed to soil contact, ensures even soil temperatures, and maintains soil moisture. The result is earlier, more even germination and more even plant growth, resulting in higher...

Kongskilde Vibro Master 3000 is a fully-mounted seedbed cultivator equipped with vibrating tines in working widths from 21' to 27', for tractors up to 250 hp. Seedbed preparation Using a vibrating-tine cultivator for your seedbed preparation has the following advantages: • Soil is completely worked and re-consolidated in the same pass. • Optimum seedbed preparation according to different soil types. • Soil layering effect. • Small clods lower down for fast germination. • Bigger clods on the surface to minimise erosion. • Seed is placed on firm soil for fast germination. • Optimum access for...

Tines • Genuine Kongskilde vibrating tines manufactured in own factory, carrying Kongskilde mark of quality. • Tine patterns with 3" , 4" or 6" spacing. • With 4 different types of genuineKongs-kilde v'brating tines available,the cultivator can work in a wide variety of soil conditions. • Attack point of the share is directly below the connection point to the frame, ensuring an even working depth even when the tine is under load.

Tines Options 4 large rubber wheels running in front of the tines on firm soil for even depth control.Rear harrow attachment system gives varying roller pressure and attack angle options. Options + = recommended + + = highly recommended

Kongskilde's Model 8200 cultivator series has 6 rows of shanks which allows for unmatched residue clearance with tines in 4" (10 cm) or 6" (15 cm) centers. The framework is 4" (10 cm) x 4" (10 cm) x 1.4" (0.635 cm) wall thickness. The framework is extruded through all frame members for added strength. The frame is 162" (4.115 m) from the front tine bar to the rear tine bar. The 8200 is using "S" tine technology that Kongskilde is known for. The S-tine consists of 3 pieces: the coil, the stem, and the share. There are 2 different size coils being used on the 8200: .524" thick (13.3 mm) for...

The Single Fold and Double Fold 8200 comes standard with heavy duty walking tandems on the mainframe and wings, front gauge wheels, single point hydraulic adjustment, drop leg jack, and a safety light kit. There are also 5 styles of harrows available for the 8200: Double Spiral Roller/Double Spike, Double Spiral Roller, Combi Harrow (Single Spiral Roller with 3-bar Flex Drag Specifications - Double Fold Sizes Depth Gauge

9100 Vertical Tillage System Gang Angle Adjustment What sets the Kongskilde Model 9100 apart from its competition is the ability to adjust the gang angle. The angle can be set at 5 different settings - 0, 4, 8, 12, and 16 degrees. This adjustment allows for a minimal cutting action for Spring use to a very aggressive cutting action for Fall use. In addition to the adjustable gangs, the Kongskilde Model 9100 uses a 20” (18” on the outside) Soil Razor VT disk blade to cut the trash and mix with the soil to help in the decomposing of the residue. The saw tooth design remains sharp as it wears...

Specifications Working Widths

The Kongskilde Stonebear is specially designed for the removal and collection of stones from cultivated land in one operation. Removing stones the easy way The Kongskilde Stonebear is specially designed for the removal and collection of stones from cultivated land in one operation. It can also be used in the construction industry to clean sites, golf courses, sport fields, turf sod operations etc. The Stonebear is designed to collect stones from approx. 28 mm (1”) to 30 cm (12”). A working width of 4m (13.1’) or 5.2m (17’) provides for a one-man operation, with greater capacity and...

The hopper design on the Stonebear is with a 1.8 cu. m capacity. The hopper has small holes in front to indicate the level and inform the operator for emptying. Transport The stone-rakes on the Stonebear are raised either mechanically or hydraulically in one smooth operation by single acting hydraulic cylinders. Upon completion to the folded position, with lock pins in place, a narrow transport width of 2.6m (8.5’) is achieved for convenient and safe road transportation. The Stonebear tows smoothly at rated tractor road speeds. Tractor requirements Unlike many conventional stone picking...

Subject to change without notice. 101001290 KNA/GB/Soil Preparation/BRO/0214 (k)kongskilde Kongskilde Industries Inc. Hudson, IL 61748 Tel. +1 309-820-1090 mail@kus.kongskilde.com adding value w °