Overview

This document provides detailed specifications and references for various tines (denti aspomietitrebbia) used in combine harvesters. It includes multiple types of tines categorized by manufacturer, type, and dimensions, along with original reference codes.

Main Sections

1. Tine Specifications and Dimensions

The document lists tines with their diameter (FILO ø), length, and other dimensional parameters. For example, tines with diameters of 5 mm, 5.3 mm, 5.5 mm, and 7 mm are specified with corresponding lengths and widths. These measurements are critical for ensuring compatibility with different combine harvester models.

2. Manufacturer and Type Classification

Tines are classified by manufacturer and type, including ARBOS (doppio and semplice), NEW HOLLAND (types 1°, 2°, 3°), FAHR, JOHN DEERE (left and right), LAVERDA (types 1° and 2°), MASSEY FERGUSON (long and short), CLAAS, and LOVA. Each tine type is associated with a specific reference code (rif.) and original part number.

3. Reference Codes and Original Part Numbers

Each tine entry includes a unique reference code (e.g., LS20001, LS20002) and sometimes an original manufacturer reference. This facilitates identification and ordering of replacement parts.

4. Contact Information

The document concludes with the contact details of the supplier, LA SPIRALE srl, including address, telephone, fax, website, and email for further inquiries or orders.

Critical Information and Recommendations

• Compatibility: Ensure the tine diameter and length match the combine harvester model specifications.
• Reference Codes: Use the provided reference codes for accurate ordering and replacement.
• Manufacturer Types: Select the correct tine type based on the combine harvester brand and model.
• Supplier Contact: For technical support or orders, contact LA SPIRALE srl directly.

Summary of Key Parameters

This table summarizes representative tine types and their key dimensions for quick reference.