Overview

This document provides detailed specifications and references for tines (denti scavabietole) used in sugar beet harvesters. It includes multiple denominations, original references, and technical parameters such as wire diameter and dimensions.

Product Specifications

• Wire Diameter (FILO): Various diameters are listed, including 9 mm, 10 mm, and 12 mm.
• Dimensions: Lengths and widths are specified, e.g., 57 mm, 70 mm, 75 mm, 90 mm, 101 mm, 178 mm, 179 mm, 268 mm, 305 mm, 330 mm, 370 mm, 510 mm, 665 mm, and 700 mm.

Product Denominations and References

The tines are categorized by denomination and original references (rif. originale), including:

• LS90001 - BIANCHI (2 spires)
• LS90002 - BIANCHI (3 spires)
• LS90003 - ITALOSVIZZERA
• LS90004 - MAGLIA PALPATORE FONTANI
• LS90005 - GABBIA FONTANI (right side)
• LS90006 - GABBIA FONTANI (left side)
• LS90007 - GABBIA FONTANI (simple)
• LS90008 - TRAVERSINO (short wire 10 mm)
• LS90009 - TRAVERSINO (long wire 10 mm)
• LS90010 - TRAVERSINO (wire 12 mm)

Manufacturer Information

All products are manufactured by LA SPIRALE srl, located in Lacchiarella (MI), Italy. Contact details include:

• Address: via Milano, 8 - 20084 Lacchiarella (MI) - ITALY
• Phone: +39 02 90076666, +39 02 9008095
• Fax: +39 02 9007338
• Website: www.laspiralemolle.it
• Email: [email protected]

Key Points and Recommendations

• Selection of tines should consider wire diameter and length to match specific harvester models.
• Right and left side tines are differentiated for proper installation.
• Multiple spire configurations are available to suit different harvesting requirements.
• Contact the manufacturer for detailed compatibility and ordering information.