Grégoire
36Pages

Solutions for vineyards MADE IN ITALY COMPATIBLE SPARE PARTS FOR GRAPE HARVESTERS GRÉGOIRE GRÉGOIRE BRAUD/NEW HOLLAND BRAUD TOW-BEHIND

The pictures shown are for illustrating purpose only.

LACRUZ® was founded in 2006 by Mr Andrea Cruzzolin and has become an important reference point in the viticulture sector. It grounds its roots in long experience and tests in a territory where the wine culture has ancestral origins. Its constant innovation and improvement of know-how in the technological and mechanical field and the endless research of new materials have set the basis for the creation of products intended for improved efficiency in this sector and for those using them. LACRUZ® offers a wide range of products: spare parts, accessories for harvesting, binding and trimming,...

COMPATIBLE SPARE PARTS FOR GRAPE HARVESTERS Andrea Cruzzolin established himself as the first producer of after-market parts for grape harvesters in Europe. Well-known at a global level, LACRUZ® was established in 2006 and became a registered trademark in 2017. The compatible spare parts by LACRUZ® represent a good alternative to original spare parts. Reliable, tested and low-priced products: these are the distinguishing features of LACRUZ® range. A team of experienced technicians identify the needs of the market, develop projects and moulds and select the most appropriate materials to...

COMPATIBLE SPARE PARTS FOR GRÉGOIRE GRAPE HARVESTERS SHAKING SECTION code FRS4GRE code FRSRGREG Original Code Reference - Original Code Reference 265566 LaCruz patented shaking rod for G1, G50, G55, G56, G115 and other models. Same length as genuine rod. A box 92 cm x 20 cm x 24 cm contains 10 pcs. code FRSRGREV Round shaking rod for G1, G50, G55, G56, G115 and other models. Same length as genuine rod. With holes for quick fixing system. Yellow. A box 92 cm x 20 cm x 24 cm contains 10 pcs. code FRO3GRE Original Code Reference 265566 Original Code Reference - Round shaking rod for G1, G50,...

COMPATIBLE SPARE PARTS FOR GRÉGOIRE GRAPE HARVESTERS SHAKING SECTION code FRPMGRE code 265574G Original Code Reference 265020 Original Code Reference 265574 Ø 28 mm shaking rod for Grégoire grape harvester olive version. Length: 900 mm. code 120572G Original Code Reference 120573 Original Code Reference 120572 Left front support for shaking rod Ø 25 mm, short model, with one hole, to adapt shaking rods Ø 22 mm to old models of grape harvesters with shaking rods with smaller Ø. code STSXGRE Right front support for shaking rod Ø 25 mm, short model, with one hole, to adapt shaking rods Ø 22 mm...

COMPATIBLE SPARE PARTS FOR GRÉGOIRE GRAPE HARVESTERS SHAKING SECTION code 510906G code SPAFGRE Original Code Reference 510906 Original Code Reference 175011-175012 Support for quick fixing system Ø 25 mm. Female clamp for Ø 25 mm shaking rod, in aluminium. code 175017F Original Code Reference 203026, 203058 Original Code Reference 175017 Male and female clamps for shaking rods Ø 25 mm, with screws and nuts. Female clamp for Ø 28 mm shaking rod, machined from solid aluminium. Fastening kit for Ø25 and 28 mm supports for shaking rods: 2 screw M10 x 70 + bolts. SHAKING CONTROL code 120676G...

COMPATIBLE SPARE PARTS FOR GRÉGOIRE GRAPE HARVESTERS SHAKING CONTROL code 330015G code 330014G Original Code Reference 330188, 330015 Original Code Reference 330014 Bearing for G60 eccentric shaft. Bearing for G70 and 71 eccentric shaft. code 240016G Original Code Reference 240017 Original Code Reference 240016 Eccentric shaft head bearing G60. Eccentric shaft head bearing G70 and G1. code 385673G Original Code Reference 385019 Original Code Reference 385673 code 387150G Original Code Reference 050014 Original Code Reference 387150 Seal washer. Floating shaft. CATCHER TRAYS RAIL. code...

COMPATIBLE SPARE PARTS FOR GRÉGOIRE GRAPE HARVESTERS CATCHER TRAYS RAIL code PRSCGRE code 345533G Original Code Reference 155018, 155183 Original Code Reference 345533 Reinforcement or extension for all catcher trays. code VTSCGRE Fixing stainless plate for catcher tray. code 359829G Original Code Reference - Original Code Reference 359829 Fastening kit for catcher trays: 2 screws M8 x 45 and M8 x 55, 2 washers and 2 bolts. First catcher tray fixing plate type-G4. code 155218G Original Code Reference 155219 Original Code Reference 155218 G4-type left catcher tray. G4-type right catcher...

COMPATIBLE SPARE PARTS FOR GRÉGOIRE GRAPE HARVESTERS CATCHER TRAYS RAIL code 203074G code 203073G Original Code Reference 203074 Original Code Reference 203073 SW-type left flexible catcher tray support unit. SW-type right flexible catcher tray support unit. code 385199G Original Code Reference BG155001 Catcher tray for PMM harvesters, with two holes. Original Code Reference 385199 Rubber joint 45x27x14 mm for catcher tray of PMM Grégoire harvesters. code SK00GRE Original Code Reference 385615 Original Code Reference 025012 Rubber joint 16x32x76 mm for SW catcher tray supports. code SK39GRE...

COMPATIBLE SPARE PARTS FOR GRÉGOIRE GRAPE HARVESTERS CATCHER TRAYS RAIL code 385997G code 265265G Original Code Reference 385997 Original Code Reference 265265 Bearing bush for picking head Ø 38 mm. code TESXGRE code TEDXGRE Original Code Reference 285006 Original Code Reference 285005 Left lower front flap, 3 plies. Right lower front flap, 3 plies. code 285006G Original Code Reference 285005 Original Code Reference 285006 Right lower front flap, 4 plies. Left lower front flap, 4 plies. code 325004G Original Code Reference 325005 Original Code Reference 325004 Spring for left lower front...

COMPATIBLE SPARE PARTS FOR GRÉGOIRE GRAPE HARVESTERS PULLEYS code 120402G code 120459G Original Code Reference 120402 Original Code Reference 120459, 120460 Bearing housing for pulley. Front lower bearing housing for pulley. code VT01GRE Original Code Reference 502702 Original Code Reference - Rear lower bearing housing for pulley. code PUANGRE Fastening kit for bearing housing for pulley: 1 screw 25 mm + 1 bolt. code PPUANGRE Original Code Reference 120404 Original Code Reference 120404 Front pulley with Ø 20 mm shaft. code PUPOGRE Front pulley with Ø 20 mm shaft, machined from solid. code...