LEAD’AIR 1400 HEAT EXCHANGER

Product catalog summary

Overview:
The LEAD’AIR 1400 Heat Exchanger is designed to complement ventilation systems by improving the atmosphere within buildings and reducing heating costs. It is easy to install and use, controls humidity, and allows for easy cleaning and disinfection.

Specifications:

Dimensions: Width 550 mm, Height 725 mm
Electrical Requirement: Fan 1400 rpm, 220V, 1A, 220 Watts
Material: High resistant polyethylene
No drainage required in the building
Optional control unit for centralized management

Key Features:

Easy installation and operation, suitable for single-person installation
Removable exchanger unit for complete disinfection
Continuous operation with RDC or REC control

Benefits:

Substantial gas savings by using building heat to warm incoming air
Maximum heat recovery without recycling
Reduces building heating needs
Improves building atmosphere with uniform temperatures and reduced temperature range
Homogeneous humidity control
Reduction in emissions such as ammonia, odor, and dust

Performance Results:
In a dynamic building of 1100m² used for broiler production, tested with four heat exchangers, the following results were observed:

Air temperature inside: 0°C
Air temperature outside: 25°C
Air inlet temperature: 30°C
Straw savings: 1 ton
Gas savings: 35%

Contact Information:
Z.A. La Richardière, 35530 Noyal sur Vilaine, France
Tel.: +33 (0)2 99 50 73 98
Fax: +33 (0)2 99 51 18 73
Email: [email protected]

Catalog excerpts

LEAD’AIR 1400 HEAT EXCHANGER COMPLEMENTARY TO THE VENTILATION IMPROVES THE ATMOSPHERE AND REDUCES HEATING COSTS Easy to install and use Controls humidity for drier litter Easy cleaning and disinfection Continuous running with RDC control

Open the catalog to page 1

LEAD’AIR 1400 HEAT EXCHANGER COMPLEMENTARY TO THE VENTILATION ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ ▶ Easy to install and use One person can install the heat exchanger on the building. Easy to use and clean. Removable exchanger unit for total disinfection of the air inlets and outlets. FRESH AND HUMID AIR PREHEATED AIR LOW RELATIVE HUMIDITY Continuous running with RDC control or REC. Allows for substantial gas savings CONTAMINATED AIR The heat exchanger uses building heat to warm the incoming air. Maximum heat recovery without recycling. The HRV reduces building heating needs. Results based on a dynamic building...

Open the catalog to page 2

LEAD’AIR 1400 HEAT EXCHANGER

LEAD’AIR 1400 HEAT EXCHANGER

Catalog excerpts

All Le Roy catalogs and technical brochures