video corpo

Low loaders
12Pages

{{requestButtons}}

Catalog excerpts

Low loaders - 1

HAUSWIRTH Bale Trailers and Low Loaders Leboulch offers a wide range of bale trailers and low loaders, from 2 to 6 wheels, from 6 to 12 m long and up to 26 tons of max. total load, in order Bale trailer brochure Route de Guernanville, 27330 LA VIEILLE-LYRE - FRANCE • tel.: +33 (0)2 32 30 67 47 - fax: +33 (0)2 32 30 59 93 • commercial@leboulch.com • www.leboulch.

Open the catalog to page 1
Low loaders - 2

The use of high-strength special steel types ensures the long life span and sturdiness of our bale trailers but provides the chassis with the necessary flexibility to face all ground and loading stresses. The automated cutting and welding allow to support heavier loads. The 360° turntable of the trailed trailers, just like the reinforced drawbar of the semi-mounted models, was designed to ensure a perfect manoeuvrability thanks to a very short steering angle. The leaf suspension provides also a high driving comfort on the road. These vehicles are furthermore designed to have a very low...

Open the catalog to page 2
Low loaders - 3

BALE TRAILERS Hauswirth design Our trailed bale trailers are fitted two separate running gears: one single axle on a 360° turntable at the front, which ensures a shorter steering angle and easy manoeuvres (Ø above 100 cm) and a single or double axle (standard tandem suspension) at the back, depending on the model. All axles are standard fitted with the hydraulic braking system (except on 100T20 and 120T20) and the drawbar is fitted with a spring to hold it in high position. The semi-mounted model is also designed and manufactured according to our long experience and recognized know-how. It...

Open the catalog to page 3
Low loaders - 4

Low loaders are multi-functional: they can be used to transport implements and other machines, but also straw. They are fitted with a reinforced chassis, floor crosspieces, as well as two loading ramps with hydraulic folding system. LOW LOADERS Hauswirth design The rear side of the floor (in wood or chequered plate) is tilted on approx. 1 m to load the machines more easily. Two telescopic supporting stands, with mechanical folding system (hydraulic as an option), are standard mounted at the back of the vehicle and ensure a very good stability during manoeuvres. MORE INFORMATION IN OUR TABLE...

Open the catalog to page 4
Low loaders - 5

leboulchLOW LOADERSHauswirth design The trailed low loader offers the possibility to completely lower the floor to easily load and transport implements or other machines by means of a double acting hydraulic stand (60 cm course) and two hydraulic rams at the back. In lowered position, the floor is 18 cm high and 69 cm on the road (with standard wheels). It is therefore easier to transport implements, like aerators and meadow aerators or even sand spreaders. This bale trailer is offered with a 5 or 6 m length and a wooden floor of 40 mm thick. As an option, it is possible to add two ladders...

Open the catalog to page 5
Low loaders - 6

MORE INFORMATION IN OUR TABLE PAGE 9

Open the catalog to page 6
Low loaders - 7

OUR +: HITCHING COMFORT The Hauswirth bale trailers benefit from a high hitching comfort thanks to the compensation spring for models with turntable and the stand for semi-mounted ones. GOOD HOLDING CAPACITIES OF THE LOAD A 4 cm edge, a floor in chequered plate and 2 reels to fasten and tighten the cords make sure the load is held very efficiently. NEW HYDRAULIC FENCES A new option of hydraulic side fences allows to increase your loading capacity. STURDINESS The construction is based on the Hauswirth design with a chassis with homogeneous strains working in the tensile limit of the steel,...

Open the catalog to page 7
Low loaders - 8

Bale trailers with turntable Semi-mounted bale trailers

Open the catalog to page 8
Low loaders - 9

Bale trailers with turntable Semi-mounted low loaders Low loaders with turntable Low loaders

Open the catalog to page 9
Low loaders - 10

Hauswirth design BALE TRAILERS Hauswirth design MODEL 80S10 LOW LOADERS Hauswirth design MODEL 80D17

Open the catalog to page 10
Low loaders - 11

Modern tools, continuous innovation Leboulch was able to impose its brand in the modern agriculture: thousands of tipping trailers, spreaders, bale trailers, low loaders, trailers and livestock trailers have already been manufactured in La Vieille-Lyre (Normandy) and sold in whole Europe. It is a strong industrial group providing customized and flexible services thanks to its standardized manufacturing, its modern production processes and its internal research department. Welding workshop 80 years of know-how Since 1921 and the first wooden agricultural cart trailed by horses, Leboulch has...

Open the catalog to page 11
Low loaders - 12

Bale trailer brochure leboulch www.leboulch.com Discover a multitude of products meeting your needs: MUCK SPREADERS HVS, Goliath, Evolupro, Evolufarm

Open the catalog to page 12

All Leboulch JBL catalogs and technical brochures

  1. GOLD2

    16 Pages

  2. LEBOULCH RANGE

    36 Pages