Air-injector flat spray nozzles ID-120/ID-90 Crop production Ground care • Air-aspirating flat spray nozzle • Extremely low-drift Advantages • 90 % drift reduction for: ID-120-025 to -06 • Drift stability over a large pressure range thanks to long injector design • Timely application even under adverse weather conditions • Increased workrate due to flexible use over a wide pressure range – adaptation by changing the sprayer speed and l/ha rate without nozzle changes • Very good deposition structure and crop penetration • Suitable for PWM Series ID Liquid Dosing orifice (ceramic) Nozzle body G 1965, G 1966, G 1968, G 1969, G 1970, G 1971, G 1972, G 1973, G 1974, G 2088, G 2287 JKI approval for mixed equipment and border nozzle IS. Injector can be removed without tools Current list at: www.lechler.com/de-en/ service/loss-reducing Bubble formation Application: Plant protection products and growth regulators Liquid fertilizer delivery Edge application Can be combined with border nozzle IS 80 Golf course Droplet sizes Ultra coarse – medium Width across flats 10 mm

ISO 25358 classification according to droplet sizes: Very fine Fine Medium Coarse Very coarse Extremely coarse Ultra coarse Subject to modifications. • Operating pressure at the nozzle (measured with diaphragm valve) • The stated liter-per-hectare rates apply to water • Verify the table values by gauging the flow rates prior to every spraying season • Pay attention to uniform nozzle adjustment The apps for Lechler agricultural nozzles make selection and use of the optimum nozzle even easier. Find out more here: www.lechler.com/ de-en/service/apps Ordering Series + Spray angle + Nozzle size +...