Compact air-injector flat spray nozzles IDK 120/IDK 90 / IDKN 120 Crop production Ground care • Air-aspirating flat spray nozzle • Very low drift Advantages • 95 % drift reduction for: IDK 90-015 C and -02 C with 25 cm nozzle spacing • 90 % drift reduction for: – IDK 120-05 to -06 – IDKN 120-03 to -04 • Compact design • Large droplet size range from ultra coarse to medium • Very low drift and loss-reducing in the pressure range up to 3.0 bar (depending on size) • Inexpensive alternative to conventional standard nozzles • Very good deposition structure and crop penetration • Suitable for PWM IDKN IDKN characteristic: Nozzle body with white stripe Series IDK/IDKN Liquid Injector G 1661, G 1662, G 1663, G 1683, G 1718, G 1799, G 1800, G 1801, G 1802, G 1936, G 2300, G 2301, G 2311 JKI approval for mixed equipment and border nozzle IDKS. Injector can be removed without tools Current list at: www.lechler.com/de-en/ service/loss-reducing Application: Plant protection products and growth regulators Liquid fertilizer delivery Spray frame Backpack sprayer Droplet sizes Ultra coarse – medium Width across flats 8 mm Golf course Edge application Can be combined with border nozzle IDKS 80

ISO 25358 classification according to droplet sizes: Very fine Fine Medium Coarse Very coarse Extremely coarse Ultra coarse • Operating pressure at the nozzle (measured with diaphragm valve) • The stated liter-per-hectare rates apply to water • Verify the table values by gauging the flow rates prior to every spraying season • Pay attention to uniform nozzle adjustment Recommendation Optimum protection of IDK/IDKN nozzles thanks to long design of MultiCap (see Page 124). Available fully assembled with IDK and IDKN nozzles. The apps for Lechler agricultural nozzles make selection and use of the...