Compact symmetrical air-injector twin flat spray nozzles IDKT Crop production Ground care • Very low-drift, air-aspirating twin flat spray nozzle Advantages • Optimum deposition thanks to symmetrical twin flat spray jet 30°/30° • Reduced spray shadow • 90 % drift reduction for: IDKT 120-02 to -06 • Compact design • Low drift and loss-reducing in the pressure range up to 3 bar (depending on size) • Suitable for PWM Series IDKT Liquid Dosing orifice (ceramic) Injector JKI approval for mixed equipment and border nozzle IDKS. Current list at: www.lechler.com/de-en/ service/loss-reducing Injector can be removed without tools Application: Plant protection products Spray frame Edge application Can be combined with border nozzle IDKS 80 Golf course Droplet sizes Ultra coarse – medium Width across flats 8 mm Pressure ranges • IDKT 015 bis -025 1.5 – 3 – 6 bar • ID

ISO 25358 classification according to droplet sizes: Very fine Fine Medium Coarse Very coarse Extremely coarse Ultra coarse • Operating pressure at the nozzle (measured with diaphragm valve) • The stated liter-per-hectare rates apply to water • Verify the table values by gauging the flow rates prior to every spraying season • Pay attention to uniform nozzle adjustment Recommendation Optimum protection of IDKT nozzles thanks to long design of MultiCap (see Page 124). Available fully assembled with IDKT nozzles. The apps for Lechler agricultural nozzles make selection and use of the optimum nozzle...