Asymmetrical air-injector twin flat spray nozzles IDTA Crop production Twin Asymmetric Full Coverage Ground care • Air-aspirating asymmetrical twin flat spray nozzle • Extremely low-drift Advantages • 95 % drift reduction for: IDTA 120-05 C • 90 % drift reduction for: IDTA 120-025 C to -04 C • Ideal for higher sprayer speeds due to 30°/50° spray configuration • Uniform deposition through 60/40 flow rate distribution • Identical spray width on the target area due to 90°/120° spray angle • Optimum wetting through finer droplet spectrum to the front in direction of travel • Drift-reducing coarser droplet spectrum to the rear • Optimum user protection thanks to removal/installation of the injector with protective gloves without tools • Nozzle in cap with MULTIJET bayonet system (incl. gasket) • Suitable for PWM Series IDTA Liquid Dosing orifice (ceramic) One piece design Air Injector O-ring Tip (ceramic) 50° Injector can be removed without tools G 2015, G 2016, G 2017, G 2018, G 2019, G 2020, G 2021, G 2022, G 2043 JKI approval for mixed equipment and border nozzle IS. Rear spray angle 90 (40 % spray volume) Current list at: www.lechler.com/de-en/ service/loss-reducing Front spray angle 120 (60 % spray volume) Application: Plant protection products Edge application Can be combined with border nozzle IS 80 Golf course Spray angle 120° front/ 90° rear Material Ceramic Droplet sizes Ultra coarse – c

ISO 25358 classification according to droplet sizes: Very fine Fine Medium Coarse Very coarse Extremely coarse Ultra coarse • Operating pressure at the nozzle (measured with diaphragm valve) • The stated liter-per-hectare rates apply to water • Verify the table values by gauging the flow rates prior to every spraying season • Pay attention to uniform nozzle adjustment Recommendation You can find adapters for other bayonet systems on Page 125. The apps for Lechler agricultural nozzles make selection and use of the optimum nozzle even easier. Find out more here: www.lechler.com/ de-en/service/apps...