*myagriexpo

RO*825L03

Product catalog summary

Overview: This document provides technical specifications and spare parts information for the ROCKINGER drawbar with ball hitch, compatible with John Deere 6000/7000 series tractors. It includes details on technical data, spare parts, and installation guidelines.

Technical Specifications:

The drawbar is designed with a ball hitch and complies with ISO 24347 standards.
Swivel angles are specified as a minimum of ±60° horizontally and ±20° vertically.
The effective installation length should not exceed 270 mm from the hitch point center to the back layer.

Spare Parts:

Key spare parts include the ball (Order No. ROE71177), safety pin for keeper (Order No. ROE71182), and dust cap (Order No. ROE25522).
Additional components such as the keeper unit and adjustment screw are also listed with their respective order numbers.

Installation and Compatibility:

The drawbar is compatible with John Deere 7000 and 8000 series, with specific mounting kits available for each series.
A rebuilding kit for forced steering is available for both sides (Order No. ROE75L108).

Selection Table:

Provides a selection table for different configurations and order numbers, ensuring correct part selection for specific tractor models.

Catalog excerpts

RO i 825 L06 J CB 7000/8000 ROV825L03 ZUGPENDEL mit MIT KKugelkupplung UGEL S WINGING DR AWBAR Zugpendel / Drawbar with ball hitch Zugpendel / Drawbar John Deere 6000/7000 WITH B ALL Technische Daten Technical data Zugpendel x mit Kugelkupplung nach x ISO 24347 Swinging x drawbar with ball hitch according x to ISO 24347 * with forced steering Spare parts: Zugpendelhalter x S erie 7000 120 Zugpendelhalter x S erie 8000 Kugel x Niederhalter x Mounting x drawbar 7000 serial Mounting x drawbar 8000 serial Ball x Keeper x Aufrüstsatz Zwangslenkung Rebuilding kit forced steering Schwenkwinkel / Swivel angle horizontal min. ± 60°, vertikal min. ± 20° (97) horizontal min. ± 60°, vertical min.± 20° Die wirksame Baulänge der Einrichtung darf maximal 270 mm betragen (Abstand von Mitte Kuppelpunkt bis Hinterkante Auflage). The effective length of the installation should be max. 270 mm (space from the center of hitch point until back layer) Benennung / Description Vierzylindermotor Sechszylindermotor Technische Daten nach ISO 24347 Technical data According to ISO 24347 Auswahltabelle / Selection table ROCKINGER ROCKINGER Member of JOST-World Member of JO

Open the catalog to page 1

Zugpendel / Drawbar Auswahltabelle / Selection table Pos. / Item Benennung / Description Kugel 80 / ball 80 Sicherungsbolzen für Niederhalter / safety pin for keeper Lagerbolzen für Niederhalter / bearing bolt for keeper ET Niederhaltereinheit KS80 / spare part keeper unit KS80 ET Niederhalter / spare part keeper Einstellschraube für Niederhalter / adjustment screw for keeper Staubschutzkappe / dust cap ROCKINGER Member of JOST World

Open the catalog to page 2

All LH Lift Oy catalogs and technical brochures

*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.

Brand list