HARVESTING MACHINES FOR STONE FRUITS AND SEED FRUITS fresh  market

Harvesting machines for stone fruits and seed fruits Since 1996, LIPCO has been developing and producing harvesting machines for the safe and fruit-preserving harvesting of stone and seed fruits, recycling sprayers for space crops in viticulture and fruit growing, and underplant cultivators. LIPCO hydraulic shakers grasp trunks and branches in seconds. The rubber gripper means that the bark is not damaged in the process. The short but extremely effective shaking process is gentle on the fruit. A high hourly output is achieved. Implements and carrier vehicles for horticulture and landscaping,...

Table of contents Page Hydraulic shaker HSA 10 Trailer harvesting unit without shaking device AE Trailer harvesting unit with shaking device AES Extension system ASS (shear system) Extension system ASR (arch extension) Conveyor and cleaning unit FRD Conveyor and cleaning unit FRT Stalk-removing unit for cherries – „built-on“ Stalk-removing unit for cherries RUPFI - „stationary“ What‘s special about the LIPCO harvesting technique

Hydraulic shaker HSA 10 – for trunk or branches (for wide areas) HSA 10 with 3 telescoping arms, transport position The advantage of LIPCO hydraulic shaker is the powerful, flexible gripper that is still gentle to the bark. The pressure on the gripper jaws can be steplessly adjusted. High shaking performance for a trunk diameter of max 55 cm. If the diameter of the trunk is more than 55 cm, branches can be shaken. Technical data: Length of shaking pole Hydraulic shift Required power The tractor requires 1x double-acting operating valve or 1x pressure and 1x free return flow as well as a 12 V...

HSA 10 with 2 telescopic arms gripper HSA 10 for diameter of trunk of max. 0.55 m proper hydraulic mechanic or hydraulic turntable to turn the gripper when branches has grown aslope HARVESTING MACHINES electrical operation

Hydraulic shaker HSA 30 – for narrow cultivation · 3-point linkage: front or rear For maximum shaking performance and best result without damaging trees! The outer jaws of the gripper can be folded hydraulically. Electric shaking process. Technical data: Lateral range from centre of machine Parallel shift Required power Shaking performance The tractor requires 1x double-acting operating valve or 1x pressure and 1x free return flow as well as a 12 V socket. hydraulic and shaker unit for rear attachment gripper can be folded rear attachment hydraulic unit and front attachment shaker unit Video...

Hydraulic shaker HSA 50 – for industrial plants · The high shaking performance for a trunk diameter of max. 52 cm and the hourly rating of max. 300 trees makes the shaker perfect to work on industrial plants. Release of tractor hitch and better directional stability because of serially additional spindle. Technical data: Hydraulic pivoting from center of tractor to the right Hydraulic shift Required power The tractor requires 1x double-acting operating valve or 1x pressure and 1x free return flow as well as a 12 V socket. HSA 50 with industrial pincer industrial pincer with 4-point-chain suspension...

Trailer harvesting unit without shaking device AE (towed) for lower link attachment to tractor LIPCO-catcher unit with sliding roll-up tarp to collect the fruits after shaking process. The fruits do not touch the soil at any time. Technical data: Tarp size 5.00 x 5.00 m up to 9.00 x 9.00 m / 12.00 m (Dimensions: width x length to extract) Required power approx. 1,100 kg (depending on machine dimensions) The tractor requires 1x double-acting operating valve and a 12 V socket. Cloth, conveyor belt and cleaning system can be steplessly adjusted from rear operator station. Hydraulic steering axle...

Trailer harvesting unit with shaking device AES (towed) for lower link attachment to tractor Options: • electronic balance • stalk-removing unit • picking belt The shaking unit is serially equipped with a powerful, flexible shaking device and a pincer that is gentle to the bark. Suitable to work on trees with a trunk diameter of 8 to 45 cm. If the diameter of the trunk is more than 45 cm, branches can be shaken. Technical data: Cloth, conveyor belt and cleaning system can steplessly be adjusted via rear control seat. Every operation of the shaker unit can be controlled from the seat. Hydraulic...

Extension system ASS (shear system) for attachment to LIPCO trailer harvesting unit AES Technical data: Extension system Tarp size 6.00 m x 6.00 m (Dimensions: width x length to extract - other dimensions on request) double shear with hydraulic cylinder Advantages at a glance: • Support via 2 support wheels • Controlled via controller of LIPCO harvesting unit AES HARVESTING MACHINES

Extension system ASR (arch extension) for attachment to LIPCO trailer harvesting unit AES Technical data: Drive Tarp size 6.00 m x 6.00 m (Dimensions: width x length to extract - other dimensions on request) hydraulic motor Advantages at a glance: • stainless steel (VA) circular arche • controlled via controller of LIPCO harvesting unit AES HARVESTING MACHINES

Conveyor and cleaning unit FRD 3-point linkage ! FRD with proper hydraulic (optional), with picking belt SB-001 (optional), with plug-in frame for big crates, with digital balance (optional) and steelplate to push the boxes. Technical data: Required power The tractor requires 1x pressure and 1x free return flow. There are some more options: conveyor belt, proper hydraulic, stalk-removing unit, picking belt, picking table, weighing system, spraying device, oil cooler Photo shows proper hydraulic on FRD including oil cooler 12 V (optional, kit, for tractor that has an oil pump output of less than...

Conveyor and cleaning unit FRT for attachment to grape transport wagon The standard unit is connected to the tractor hydraulic. By using the option „proper hydraulic“ the unit is powered by the rear PTO shaft (540 rpm). An additional conveyor belt is another possible option. To mount it on 90° the conveyor belt makes it possible to fill-in big crates. Industrial processing is then possible as well. Technical data: Required oil quantity Length of conveyor belt 2.00 m (tray height max. 1.56 m) 2.30 m (tray height more than 1.56 m) The tractor requires 1x pressure and 1x free return flow. digital...