viniculture I fruit growing I tree nurseries I special crops I ornamental plants Viele Einsatzmöglichkeiten www.lip

Over-row cross flow fan unit ! Advantages of using this spraying technology: • The new fan arrangement (suction- and pressure sides are opposite) reduces the consumption of plant protection agent by up to 40 % , thus achieving JKI* 95 % drift reduction class Extremely smooth running at max. speed High spraying performance (time saving) due to multirow treatment - up to 4 rows (both sides) are possible with GSG-NV-VM2. Improved deposit values due to air-assisted, double-sided application More pesticides available No problems with neighbouring cultures User protection Government funding possible...

Nozzle chart Recycling sprayer Recycling sprayer Output per nozzle (l/min) No. of open nozzles per tunnel Output per nozzle (l/min) x No. of open nozzles per tunnel LIPCO cross-flow fan sprayer GSG Output rate Lechler ID/IDK 90 flat fan venturi nozzle Nozzle size Pressure range Note maximum nozzle pressure according JKI! * = 95% loss reduction agreed by JKI / Germany Output rate l/min with pressure in bar Output rate ALBUZ ® CVI 80° flat fan venturi nozzle Nozzle size Pressure range Note maximum nozzle pressure according JKI! * = 95% loss reduction agreed by JKI / Germany Output rate l/min with...

Technology: With the LIPCO fan unit GSG, drift is becoming a valuable spray agent. Non-deposited spray agent returns via recycling technology and is filtered back to the spray agent tank. This protects the environment and saves you a lot of money. Recycling: New fan arrangement (suction- and pressure sides are opposite) thus consistently high recycling rates, less drift and better deposit of plant protection agent. Equipment testing: Worldwide equipment testings with identical good result: Spray agent is evenly spread on lower- and upper side of the leaves. EU funding: LIPCO recycling sprayer...

Options / extras: Recycling pan – Recycling pan with built-in hydraulic injector and coarse strainer, thus no additional pump required. Adjustable axle – For units NV (hydraulic version as option, stroke 2x300 mm / 2x10 in.), wheels are stepless adjustable to max. row width –> smooth running. Driving on public roads with axle adjusted to 2m (79 in.) width. Slope compensation – compensates up to 7° side slope (additional height adjustment necessary) (as option) – If the tractor has a pump capacity of less than 25 l/min, the hydraulic equipment is usually not sufficient to run GSG. In this case,...

Options / accessories: Hydraulic pivoting drawbar – plant protection agent pump of all LIPCO trailer units is mounted on the drawbar thereby maximum angle of turn without wide-angle PTO shaft Nozzle lighting – indirect lighting of nozzles for optimal nozzle function control, especially for working during the night Tandem oscillating axle Hydraulic height adjustment – ydraulic wheel adjustment h (left and right side each 300 mm (12 in.)) – ydraulic dual-circuit brake as an h option – standard stroke 300 mm (12 in.) – retracting during turning progress – exact position of the first nozzle Steering...

Control system: LIPCO control box standard – digital pressure display and control of hydraulic functions via button LIPCO control box – digital pressure display and control of hydraulic functions via button – control of effective spray output LIPCO control box – digital pressure display and control of hydraulic functions via button – control of effective spray output – regulation of effective spray output, extended modules and interface via documentation LIPCO control box recycl-pilot – digital pressure display and control of hydraulic functions via button – electrical monitoring and control...

Saddle-mount unit TSA-1 (one row) · without recycling · for 3-point attachment to tractor sprayer with 300 l or 400 l tank (other tank sizes upon request) saddle-mount unit with one-sided crossflow fan equipment WITHOUT recycling Photo: crawler-mounted vehicle with TSA-1 Photo: sprayer equipped with support wheels (optional at extra cost) Technical data: Max. row height Fan distance adjustable (outer dimension) Tank width Tractor requires 1x double-acting operating valve or 1x pressure and 1x free return flow. PLANT PROTECTION UNITS

Trailer unit TSN-1 (one row) · without recycling · for lower link attachment to tractor sprayer unit with 600 l, 1,000 l or 1,500 l tank saddle-mount unit with one-sided crossflow fan equipment WITHOUT recycling Photo: TSN-1 / 1,000 l – with tires 10.0/75-15.3 10PR Technical data: 600 l tank Tank width Standard tires Tractor requires 1x double-acting operating valve or 1x pressure and 1x free return flow.

Conversion set GSG-U-VM1/2 (right/left) · with recycling For: • existing trailer or saddle-mount sprayer • mounts on tractor on roll bar, center mounting and leaf-cutting frame Conversion set with one/two-sided crossflow fan equipment, WITH recycling Required capacity of plant protection agent pump: single-row equipment: min. 90-100 l/min double-row equipment: min. 120-130 l/min Required oil capacity from tractor 25 l/min Technical data: Max. row height Width adjustment width of tractor/trailer/saddle-mount unit D= movable row space + 0.80 m (32 in.) one-row design D= movable row space + 1.20...

Attachment kit for trailer and saddle-mount unit GSG-UK-VM2 (two rows) · with recycling · for trailer/saddle-mount unit For attachment to trailer/saddle-mount unit instead of existing fan-blower unit Attachment kit with two-sided crossflow fan equipment (hydraulic driven), WITH recycling Photo: trailer unit with GSG-UK-VM2 Minimum required basic equipment – trailer/saddle-mount unit: Pump 130 l, 20 bar, incl. pressure filter unit and armature Oil quantity required from tractor 30 l/min Base frame with tank and attachment unit (sufficient base frame stability because of additional weight of 340...