b1001
92Pages

{{requestButtons}}

Catalog excerpts

b1001 - 1

USER MANUAL TRANSLATION OF ORIGINAL USER MANUAL Ref. no. 0458-395-5301 LOGOSOL B1001 G2 BAND SAWMILL Read through the user manual carefully and make sure you understand its contents before you use the machine. This user manual contains important safety instructions. WARNING! Incorrect use can result in serious or fatal injuries to the operator or others.

Open the catalog to page 1
b1001 - 2

THANK YOU FOR CHOOSING A LOGOSOL MACHINE! elcome! We are very pleased that you have demonstrated your confidence in us by purchasing this sawmill, and we will do our utmost to meet your expectations. Logosol has been manufacturing sawmills since 1989. In that time we have supplied approximately 50,000 machines to satisfied customers the world over. We care about your safety as well as we want you to achieve the best possible results with your sawmill. We therefore recommend that you take the time to carefully read this user manual from cover to cover in peace and quiet before you begin...

Open the catalog to page 2
b1001 - 3

Description of the band sawmill 4 Operating the band sawmill 10 Start & stop instructions 13 Assembly: Rail frame 26 Adjustment: Rail frame 40 Final assembly of Rail frame 44 Final assembly of sawhead 51 Final assembly of sawhead: 58 Briggs 23 hp Final assembly of sawhead: 67 electric motor Order of adjustments 72

Open the catalog to page 3
b1001 - 4

This user manual, the instructions of the motor, the assembly instructions of the band sawmill and instructions for accessories should be seen as integral parts of the band sawmill and should always be kept together with it. They should also follow the band sawmill if it is sold. Responsibility for the band sawmill being correctly assembled and put into operation, and being used in a safe way, lies solely with the person(s) who assembles and uses the band sawmill.

Open the catalog to page 4
b1001 - 5

DESCRIPTION OF THE BAND SAWMILL This band sawmill is designed for cutting knot-free logs and timber. Saw carriage Blade cooling tank Fuel tank Machine label Lift rings Depth-of-cut scales Band wheel guard Push handle/Throttle Sawhead height crank Blade tension handle Adjustable blade guard Cross bunk Log support Log clamp Rail end stop Leveling foot

Open the catalog to page 5
b1001 - 6

COMPONENTS - 1 X - T- handle 02-00247 Check that all components are included in the shipment when receiving your sawmill. Short rail section 03-01972 Rail section, long 03-02180 end piece Long rail section 03-01973 Control arm Box containing 6 bolt bags Bag of smaller components 1 Bag of smaller components 2 Cross bunk Rail frame section Log clamp Box containing 32 8300-005-0150 joint pins (03-01814) Log clamp attachment Box containing 10 levelling feet, (9039-001-0001) Long log support Short log support Anti-tip plate

Open the catalog to page 6
b1001 - 7

Flange bolt M8x16 Flange nut M8 Flange bolt M6x16 Flange nut M6 Flange bolt M8x25 Flange bolt M8x12 Flange bolt M8x20 Tensilocknut M8 Hex bolt M12x90 Hex nut M12 Flange nut M12 Hex bolt M12x140 Hex nut M12 Hex bolt M6x65 Flange nut M6 Washer M6 Hex bolt 1X410x95 Flange nut M10 Hex bolt M8x95

Open the catalog to page 7
b1001 - 8

Spacer Track sweeper Rail tube plug Flat washer M8 Spacer sleeve M8x11 Washer Rubber bumper Eccentric handle Anti-tip wheel SAFETY INSTRUCTIONS Make sure that all warning and information lables are in place, and that they are clean and legible. Damaged labels should be replaced immediately. handling band blades. Band blades and engine parts can be hot after sawing. WARNING! This symbol means that you should pay particular attention and is always followed by information about the relevant risk. This symbol is followed by important information or instructions. Pay particular attention when...

Open the catalog to page 8
b1001 - 9

SAFETY INSTRUCTIONS THE SAFETY EQUIPMENT OF THE BAND SAWMILL WARNING! Never use the machine if the safety equipment is defective. The safety equipment must be checked and maintained. Here is a description of the safety features of the band sawmill together with their functions. Interlock safety switch on the band wheel guard One of the hinges of the band wheel guards is equipped with an interlock safety switch. The machine can not be used without having the guards closed. Rail end stops Mechanical stops that prevent the saw carriage from rolling off at the end of the rails. OPERATOR...

Open the catalog to page 9
b1001 - 10

OPERATING THE BAND SAWMILL WARNING! Cutting tools: Always stand behind the saw carriage and keep both your hands on the handles while operating the machine. Never stand in front of the carriage or band blade. Never pull the carriage through the cut. WARNING! Risk of crush injury. Rotating parts: Even a slight force applied to the release mechanism of the sawhead can cause the sawhead to drop uncontrollably and make the crank rotate rapidly, which can cause serious injury. /l\ WARNING! Never modify this machine in such a way that it no longer corresponds with the original design. Do not use...

Open the catalog to page 10
b1001 - 11

USING THE BAND SAWMILL Every time before operating the band sawmill: Ensure that • the operator is wearing the prescribed personal protective equipment • the prescribed maintenance procedures have been properly carried out • the band blade is not moving when the engine is idling • the machine stands firmly and securely and the rails are supported along their full length • the anti-tip wheels of the carriage and the rail end stops are properly installed • everything on the band sawmill is properly and securely installed and in good working order • all safety features on the band sawmill are...

Open the catalog to page 11
b1001 - 12

USING THE BAND SAWMILL STORING If the band sawmill is not in use, even when it is for short periods of time, the band blade must be removed from the machine and be stored where it is inaccessible to children and other persons. For longer periods of storage: - empty the fuel tank and the water tank, - remove the band blade from the machine, - close the fuel valve, - secure the saw carriage to the bed. Store the band sawmill where it is inaccessible to children and other persons, preferably in a locked location. After very work session, release the tension on the blade to reduce wear....

Open the catalog to page 12
b1001 - 13

SAWDUST MANAGEMENT If the sawmill is used outdoors it can be operated without a chip extractor. Exhaust hose: In case an exhaust hose is connected to the sawmill, it must have a spiral that can be grounded. Make sure that you regularly remove sawdust that has accumulated around the machine, using a shovel e.g. If a chip extractor is connected, you need a capacity of at least 800m3/h. START & STOP INSTRUCTIONS/ PETROL ENGINE START 1. Open the fuel valve by moving the fuel control lever to the right until it reaches the position ”ON”. 2. To start a cold engine, move the choke control lever to...

Open the catalog to page 13

All Logosol AB catalogs and technical brochures