Compact Cleaning Unit
2Pages

{{requestButtons}}

Catalog excerpts

Compact Cleaning Unit - 1

LUBING 6 Technical data • The heating process requires approx. 90 min. depending on the volume and the heating capacity. • The cleaning perfomance can be adjusted via the dual timer. The time for the stop of the chain can be varied from 30 to 120 seconds. • The duration of the cleaning process at a conveyor length of 100 m (chain length of 200 m) needs depending on the setting of the dual timer between 2 and 6 hours. • Regular cleaning intervals of at least 3 months are suitable. If the demand is accordingly high, cleaning should take place more frequently. • One container filling of cleaning liquid is sufficient for approx. 200 m conveyor chain. • After each cleaning process, the basin must be thoroughly flushed with fresh water. • When draining the cleaning liquid into a dirt water channel, observe the local provisions! Required components • Connecting part with deflection • Mobile basin incL. ultrasonic unit and heating elements • Cleaning agent Dimensions in mm (LxWxH) Type 350: 800 x 870 x 520 Type 500: 800 x 1020 x 520 Type 750: 800 x 1270 x 520 Technical prerequisites • Fresh water supply • Power supply 32 A • Dirt water channel Compact Cleaning Unit for conveyor chains For further information: www.lubing.comTechnical modifications reserved. LUBING £* LUBING Maschinenfabrik GmbH & Co. KG Lubingstrafie 6 • 49406 Barnstorf (Germany) Tel.: +49 (0) 54 42 - 98 79-0 • Fax: +49 (0) 54 42 - 98 79-33 www.lubing.com • info@lubing.com

Open the catalog to page 1
Compact Cleaning Unit - 2

Compact Cleaning Unit for conveyor chains The principle Connecting part with deflection Dual timer The compact LUBING cleaning unit has been developed to clean conveyor chains for egg transport. Cleaning takes place on ultrasound basis with hot water and under addition of a cleaning agent. The unit thus cleans the entire conveyor chain of dirt securely and reliably and removes hotbeds for bacteria and fungus infestation. The connecting part with deflection leads the conveyor chain for cleaning through the basin. The connecting part is integrated directly into the conveyor line. The basin...

Open the catalog to page 2

All LUBING Maschinenfabrik GmbH & Co. KG catalogs and technical brochures

  1. ACCESSORIES

    2 Pages

  2. PLASTIC-PADS

    2 Pages

  3. ROD CONVEYOR

    2 Pages

  4. INPUT UNIT

    2 Pages

  5. DOSATRON ®

    2 Pages

  6. Rod-Conveyor

    2 Pages

  7. Water supply

    2 Pages

  8. combiMaster

    2 Pages