CURVE CONVEYOR
2Pages

{{requestButtons}}

Catalog excerpts

CURVE CONVEYOR - 1

SELECTION In order to further reduce the number of eggs with light jumps (e.g. due to transfer from the longitudinal belt to the curve conveyor), the cross bars of the conveyor chain can be coated with plastic. This plastic coating increases the damping effect of the chain and improves protection for the egg in extreme climate conditions. This conveyor chain version is available in widths of 350, 500 und 750 mm. VERSIONS System widths Conveyor width The width of the curve conveyor determines the conveying rate. At a speed of 7 m/min. the following values result: The required height is achieved by means of height-adjustable floor supports. Several versions are available which can be used universally. For safety reasons, the conveyor chain is covered on both sides with a red protective profile. A telescopic unit is required to connect the conveyor to an egg lift. This is designed with a balancing unit and articulated elements on both sides and can be inserted into the curved conveyor system at any point. The length depends on the given battery height and is produced individually. Telescopic unit Conveying rate Driving units The choice of the right drive is based on the conveying lengths, taking into account height differences and the number of curves. The individual engagement positions of the drives are calculated individually for each project as part of the project planning. Therefore, we recommend that you request a design for each project. This ensures the selection of the correct drive positions and thus ensures smooth operation of the conveyor system for a long time. SUITABLE COMPLEMENT CLEANING UNIT INPUT UNIT LUBING Maschinenfabrik GmbH & Co. KG LUBING Maschinenfabrik GmbH & Co. KG Lubingstraße 6 · 49406 Barnstorf +49 (0) 54 42 - 98 79-0 +49 (0) 54 42 - 98 79-33 www.lubing.de · info@lubing.de Cleaning Unit Input Unit 0880-1 / 22-05 · Subject to technical changes.

Open the catalog to page 1
CURVE CONVEYOR - 2

CURVE CONVEYOR FOR EGG TRANSPORT The conveyor system is of crucial importance for egg farms of all sizes. Many years of practical application experience with LUBING Conveyor-Systems confirm our leading position worldwide. Due to the different house arrangements, a tailor-made individual solution is usually required. We will be pleased to provide you with an individual design for the optimum ConveyorSystem to meet your requirements. The central element of the curve conveyor: The conveyor chain The conveyor chain runs on a high-strength plastic sliding profile. It consists of two hardened outer...

Open the catalog to page 2

All LUBING Maschinenfabrik GmbH & Co. KG catalogs and technical brochures

  1. ACCESSORIES

    2 Pages

  2. PLASTIC-PADS

    2 Pages

  3. ROD CONVEYOR

    2 Pages

  4. INPUT UNIT

    2 Pages

  5. DOSATRON ®

    2 Pages

  6. Rod-Conveyor

    2 Pages

  7. Water supply

    2 Pages

  8. combiMaster

    2 Pages