PAD-CLIMATE-SYSTEMS
2Pages

{{requestButtons}}

Catalog excerpts

PAD-CLIMATE-SYSTEMS - 1

VERSIONS The Pad-Climate-System is available in the following basic sets1): For paper pads and LUBING plastic pads Pad thickness 3 m For other plastic pads 1) The basic sets include all necessary components: the water gutter system, the water distribution system and the supply unit, completely assembled. TECHNICAL DATA Recommended installation Middle connection: max. 42 m Pump types 48 03 021 2) Connection kits include Ø2“ pipes (4 x 2.5 m), brackets, straight connectors and 2 x 90° elbows and connection accessories. 48 03 031 The standard voltage for all pumps is 230 V / 50 Hz. Special voltages on request. Max. Pad length after connection set: 4.5 m for paper pads, 3.0 m for plastic pads. SUITABLE COMPLEMENT WATER SUPPLY AND DOSER AUTOMATISCHESFLUSH SYSTEM AUTOMATIC SPÜLSYSTEM LUBING Maschinenfabrik GmbH & Co. KG Water supply Automatic flush-system 0842-1 / 22-03 · Subject to technical changes.

Open the catalog to page 1
PAD-CLIMATE-SYSTEMS - 2

PAD-CLIMATE-SYSTEMS The LUBING Pad-Climate-System is used in areas where highly efficient cooling is required. It can be used for many different cooling purposes and is specifically used for evaporative cooling in barns. The technology of evaporative cooling Water is transported through the system from a pump station and directed onto the pads from above via a water distribution pipe and the deflector. The water then flows over the corrugated surface of the pads. Some of the water evaporates due to the warm and dry air flowing through the pads. The remaining water is used to clean the pads and...

Open the catalog to page 2

All LUBING Maschinenfabrik GmbH & Co. KG catalogs and technical brochures

  1. ACCESSORIES

    2 Pages

  2. PLASTIC-PADS

    2 Pages

  3. ROD CONVEYOR

    2 Pages

  4. INPUT UNIT

    2 Pages

  5. DOSATRON ®

    2 Pages

  6. Rod-Conveyor

    2 Pages

  7. Water supply

    2 Pages

  8. combiMaster

    2 Pages