Four auger horizontal mixing system Large diameter augers with flighting thicknesses ranging from 3/8” to 3/4” Large diameter heavy wall auger tubes for extra strength to do the tough mixing jobs Ledger with shear bar for the harder-to-mix rations Heavy duty bearings on the drive end of all augers provide for years of troublefree operation. External grease banks for all bearings (drive & discharge) Rear oil bath drive compartment lets all chains and sprockets run in oil Planetary gear reduction to add simplicity and reduce input H.P. requirements Trailer models equipped with adjustable and replaceable hitch assembly Rear bumper for added protection against damage Rear light kit Safety chains Re-capped truck tires All come complete with a 4 point, basic read up, read down Digi-Star electronic scale systems (stationary models are available without scales) Various different electronic scale indicators and options Remote indicator and remote zeroing capabilities Rear wireless camera Hydraulic raise and lower discharge chute Special discharge lengths Hydraulic flap on discharge chute Manual flap on discharge chute Magnet in discharge flap Aircraft tires Stainless steel liners (complete to within 12” of top, or under the augers only) Electric diverter valve for tractors with only one set of remotes Upgrade to various electronic scale indicators and accessories Helm Welding (1983) Limited Lucknow, Ontario, Canada Phone: 519-529-7000 www.lucknowproducts.com inquiry@lucknowproducts.

Horizontal Stationary Model Specification Table MODEL SIZE Base Mixing Capacity (cubic feet) A - Hopper Length B – Overall Length C – Overall Height D – Width E – Floor to Door F – Door Opening Width G – Stand Height H – Door to Front I – Door to Rear Hopper Size - tube - flighting - diameter - tube - flighting - diameter Roller Chains Approx. Weight (lbs.) Unless otherwise indicated, all dimensions are in inches with standard equipment installed. Specifications subject to change without notice. Certain features shown may be optional All Horizontal Models Hopper Bottom – (thickness) ¼ double...