Vertical TMR Feed Mixers - Single Screw Trailer
5Pages

Quality Products Since 1968 Vertical TMR Feed Mixers - Single Screw Trailer Standard Features  Standard side discharge with slide chute  Large diameter auger with 5/8” thick flighting  Tungsten coated knives  Adjustable knives for more aggressive mixing action  Adjustable and replaceable hitch for ease of hook on various draw bar heights  ¾” thick adjustable hay restrictor plates  PTO drive assembly with shear bolt for equipment protection  Exclusive multi-lobe PTO drive shaft that provides constant lubrication  Door cylinder equipped with relief valve protection  Planetary drive system with easily accessible service and maintenance lubrication points  Rear light kit  Safety chains  All single screw vertical mixers come complete with a 4-point Digi-Star weigh bar scale system including a basic read up, read down electronic indicator Options  Hydraulic cross conveyor to feed both sides  Hydraulic raise & lower discharge conveyor extensions in many lengths  Magnet kit available for slide chute or unloading conveyor  Two speed gearbox for better mixing power  Hydraulic shifter for two speed gearbox  Chain overflow kit to retain light mixes in tub  Rubber extension for larger capacity mixes  Ladder platform  2nd sweep on augers  Upgrade to various electronic scale indicators and accessories  Knife option – carbide tip  Stainless liner – walls, floor or auger available  Rear wireless camera Manufactured by: Helm Welding (1983) Limited Lucknow, Ontario, Canada Phone: 519-529

Vertical Single Screw Trailer Specification Table MODEL Base Mixing Capacity (cubic feet) Capacity with 9" rubber extension (cubic feet) A - Overall Height B - Tub Length C - Overall Length D - Overall Transport Width - Slide Chute - Bi-direction conv. - 36" Conveyor Extension E - Tub Width F - Tread Width G - 36" Conveyor Ext - lowest position reach H - 36" Conveyor Ext - min. unloading height - max. unloading height I - Bi-direction Cross Conv. - max. unloading height Scale System Tires Number of Augers Tungsten Coated Knives (qty) Auger Flighting (thickness) Floor Thickness (excluding...

Quality Products Since 1968 Vertical TMR Feed Mixers - Single Screw Stationary Standard Features             Large diameter auger with 5/8” thick flighting Tungsten coated knives Adjustable knives for more aggressive mixing action ¾” thick adjustable hay restrictor plates Manual door opener Standard safety grate on top of bin Standard side door opening (right or left side) with discharge chute Standard two speed gearbox Electric motor drive with belts and pulleys Planetary drive system with easily accessible service and maintenance lubrication points Standard stands 17” high...

Vertical Single Screw Stationary Specification Table MODELS Base Mixing Capacity (cubic feet) A – Overall Height (with standard stands) B – Tub Length C – Overall Length D – Overall Width E – Tub Width F – Floor to Chute min. (with standard 17” stands) Scale System (if ordered) Number of Augers Tungsten Coated Knives (qty) Auger Flighting (thickness) Floor Thickness (excluding 5/8” support plates) Hopper Wall (thickness) Door Opening Width Approximate Weight (Lbs.) Unless otherwise indicated, all dimensions are in inches and pounds with standard equipment installed. Specifications subject...

Quality Products Since 1968 Vertical TMR Feed Mixers - Single Screw Truck Mounts Truck mounted mixers are designed to fit the farmer’s special needs. Any of our single screw trailer models can be mounted on trucks. Various drive and discharge options are available. Contact your local dealer or Helm Welding directly for special requirements and pricing on a proven, well manufactured truck mount mixer. Helm Welding (1983) Limited Single Screw Stationary Lucknow, Ontario, Canada Phone: 519-529-7000 Specification Table www.lucknowproducts.com inquiry@lucknowproducts.com