(Product sheet Silage additive controller - 0711) Silage additive controller Technical specifications Size: 221 x 136.4 x 50 mm Display: 6 digits with backlight Ordering number 001-1-6001 Silage Additive Controller includes: 1 monitor 1 mounting kit for monitor 1 pcs. reed sensor 4.5 m (110-0-4500) 1 pcs. ferrit magnet (20 x 0 4,3 x 10 mm) 1 pcs. flowmeter 200 P-S 8 l/min 1 pcs. electrical pump 12 V DC 2 nozzles with holder Guarantee 1 year guarantee from date of delivery. Use The controller is used for controlling the dosage of silage; like formic acid and lactic acid bacteria when harvesting grass for feeding purposes. Functions O Measuring and maintaining a programmed flow in litres/minute O Measuring and maintaining a programmed flow in litres/ 100 m, dependent on driving speed O Acid spent on the specific job O Flowmeter impuls-regulation O Manual/Automatic flow control O Registering litres per job O Registering total litres Installation The monitor is installed in the cabin on the included fittings. Installation guide for sensors and magnets is included. Lykketronic A/S • Stengaardsvej 20 • DK-9670 Logstor, Denmark • Telephone: +45 9868 3019 • Fax: +45 9868 3216 • [email protected] • www.lykketronic.dk