(Product sheet Hall sensors - 0711) 0 12 x 45 mm Cable 3 - 8 mm with magnets NO 25 mA 100 ohm 12 V DC 1 year guarantee from date of delivery. Use These sensors are typically applied where many activations occur, e.g. by measurement of rpm on motors. Among other things these sensors are used in connection with Lykketronic monitors and computers, however normally not in connection with Flex Counters. Technical specifications Hall sensors are based on magnets and are delivered in two versions. Rectangular Dimensions: Connection: Range: I/O function: Max load: Resistance: Power supply: Cylindrical Dimensions: Connection: Range: I/O function: Max load: Resistance: Power supply: 110-1-7001 7 m sensor without plug Sensor accessories: 000-1-0003 Installation kit: screws (2 pcs.) and nuts (2 pcs.) 000-1-0012 Installation kit: screw, nut, magnet Sensor accessories: 000-1-0012 Installation kit: screw, nut, magnet Installation The sensor is mounted nearby the tractor or equipment wheel. The corresponding magnet is mounted on the rotating shaft. Sensors can be delivered in cable lengths as requested. Guarantee Lykketronic A/S • Stengaardsvej 20 • DK-9670 Logstor, Denmark • Telephone: +45 9868 3019 • Fax: +45 9868 3216 • [email protected] • www.lykketronic.dk