M105 Self-Propelled Windrower
228Pages

Parts Catalog 169891 Revision B Original Instruction

Published June, 2015 NOTE: Keep your MacDon publications up-to-date. The most current version can be downloaded from our website (www.macdon.com) or from our Dealer-only site (https://portal.macdon.com) (login required).

Introduction This Parts Catalog lists all the replacement parts that can be ordered for a MacDon M105 Self-Propelled Windrower. Bold text is used to indicate updates made at the current revision level. With each new revision of the catalog, previous revisions are returned to regular text. In this catalog, right-hand (RH) and left-hand (LH) are determined from the operator’s position, facing forward with the windrower in cab-forward position. An arrow is sometimes used in illustrations to indicate cab-forward position. NOTE: A Russian translation of this manual can be ordered from MacDon,...

Serial Number Breaks The side of the serial number on which the dash (–) appears determines whether the part is used "up to" or "after" the serial number given. Example: • –162249 Used on machines up to and including serial number 166249. • 166250– Used on machines including and after serial number 166250. Abbreviations The following abbreviations are used in this catalog. A/R – as required (quantity varies) C/W – complete with CSK – countersink DK – double knife DT – distorted thread FLG – flange HYD – hydraulic I.D. – inside diameter LH – left hand (determined from operator's position,...

This list covers changes made since the last revision (169891 Rev. A)

FRAME/HOSE GUARDS

FRAME/HOSE GUARDS Part Number MOULDING – FRAME (UNIGRIP) MOULDING – FRAME (UNIGRIP) MOULDING – FRAME (UNIGRIP) MOULDING – FRAME (UNIGRIP) MOULDING – FRAME (UNIGRIP) Serial Number

WHEEL LEGS

WHEEL LEGS Part Number KIT – LEG PIN EXTRACTION TOOL (DEALER SET–UP AID) 1 WASHER – FLAT Serial Number 1. Kits available through Whole Goods only.

Part Number SUPPORT – RH PLATFORM WELD'T BUMPER – RUBBER COVER – SOFTEX GRIP GUARD – FOAM RUBBER ASSY – STIRRUP LATCH RAIL – WELD'T BUMPER – RUBBER STEP – WELD'T PLATE – LATCH MOUNT RAIL – FRONT WELD'T, LH RAIL – FRONT WELD'T RH

PLATFORM MECHANISM Platform Mechanism

PLATFORM MECHANISM Part Number BUSHING – TEFLON SUPPORT – HINGE, PLATFORM BUSHING – BRONZE SUPPORT – PLATFORM, WELD'T LINK – PLATFORM TUBE – HINGE ANGLE – PLATFORM ARM PIVOT LINK – STRIKER WASHER – FLAT

WALKING BEAM Walking Beam

WALKING BEAM Part Number BUSHING – SLEEVE BEAM – CENTER ASSEMBLY Serial Number BUSHING – SLEEVE (POLY) BUSHING – SLEEVE FITTING – LUBRICATION 1/4-28 TAPER THD PIVOT WELDMENT WASHER – HARDENED 2. Includes items #3 (MD #107201), #4 (MD #183420), decal (MD #23165), and reflectors (MD #115145, 115147). Refer to Section 56 Information Decals and Reflectors, page 163. 3. Includes items #5 (MD #161226), decal (MD #109842), and reflectors (MD #115145, 115147). Refer to Section 56 Information Decals and Reflecto

Part Number Serial Number CASTER – WELDMENT, C/W DECAL SHAFT – WELDMENT STEM – TIRE VALVE ASSEMBLY #TR – 415 RING – RETAINING BEARING – ASSEMBLY BEARING – BALL FITTING – LUBE BOLT – WHEEL (PRESS-IN) 9/16 NF X 53 LG WASHER – HARDENED FLAT 4. Kits available through Whole Goo

Part Number Serial Number CASTER – LH WELDT, C/W DECAL CASTER – RH WELDT, C/W DECAL TIRE – 7.50-16 8 PLY C/W INNER TUBE TUBE – INNER TIRE HUB – C/W BEARING CUPS AND GREASE FITTING BEARING – CONE BEARING – CONE ROLLER SEAL – GREASE FITTING – LUBE, DRIVE TYPE WASHER – HARDENED FLAT WASHER – FLAT 5. Kits available through

Part Number Serial Number CASTER – WELDMENT, C/W DECAL SHAFT – WELDMENT BEARING – ASSEMBLY BEARING – BALL SPH O.D C/W LC 1 3/8 IN. BORE RING – RETAINING STEM – TIRE VALVE ASSEMBLY #TR – 415 TIRE – 10.00 X 16, F2 FRONT STEER, 8 PLY BOLT – WHEEL (PRESS-IN) 9/16 NF X 53 LG WASHER – HARDENED FLAT 6. Kits available through Whole Goods only. 7. For units without anti-shimmy

Part Number Serial Number CASTER – LH WELDT, C/W DECAL CASTER – RH WELDT, C/W DECAL TIRE – 10 X 16, F2 FRONT STEER, 8 PLY HUB – C/W BEARING CUPS AND GREASE FITTING BEARING – CONE BEARING – CONE ROLLER SEAL – GREASE FITTING – LUBE, DRIVE TYPE STEM – TIRE VALVE ASSEMBLY #TR – 415 WASHER – HARDENED FLAT WASHER – FLAT 8. Kits available through Whole Goods only. 9. For units without ant

DRIVE WHEELS AND TIRES – EIGHT BOLT Drive Wheels and Tires – Eight Bolt

DRIVE WHEELS AND TIRES – EIGHT BOLT Part Number Serial Number KIT – DRIVE TIRES, TURF 23.1–26 PLUG – WHEEL STEM – VALVE (METAL) KIT – DRIVE TIRES, TURF 18.4 – 26 WHEEL – 26DW – 16L C/W DECALS AND VALVE STEMS (REVERSIBLE) STEM – VALVE (METAL) PLUG – VALVE STEM SPUD – WHEEL WASHER – FLAT HARDENED 5/8 IN. NOMINAL (L9) 11 KIT – SERVICE L9 DRIVE WHEEL HARDWARE 10. Kits available through Whole Goods only. 11. Not serviced individually; service with kit MD #166729. 12. Kit replaces any previous nut for the eight-bolt configuration to eliminate any possible bolt loosening. Includes: 16 nuts (A), 16...

DRIVE WHEELS AND TIRES – EIGHT BOLT

DRIVE WHEELS AND TIRES – EIGHT BOLT Part Number Serial Number WHEEL – 26DW – 16L C/W DECALS AND VALVE STEMS (REVERSIBLE) STEM – VALVE (METAL) PLUG – VALVE STEM SPUD – WHEEL KIT – DRIVE TIRES, TURF 580 – 70R 26 TIRE – 580 – 70R26, TURF RADIAL STEM – VALVE (METAL) PLUG – VALVE STEM WASHER – FLAT HARDENED 5/8 IN. NOMINAL (L9) 14 KIT – SERVICE L9 DRIVE WHEEL HARDWARE 13. Kits available through Whole Goods only. 14. Not serviced individually; service with kit MD #166729. 15. Kit replaces any previous nut for the eight-bolt configuration to eliminate any possible bolt loosening. Includes: 16 nuts...