*myagriexpo

weedcontrol

Product catalog summary

Introduction
The Steketee Finger Weeder is a specialized tool designed for inter-row weed control, particularly effective against small and newly emerged weeds within crop rows. It enhances traditional mechanical weeding methods by increasing the percentage of land that can be cleared of weeds.

Specifications
The finger weeder features a turning disc equipped with flexible fingers that operate between crop rows to eliminate smaller weeds. It can be adapted with either rubber or brush fingers, depending on the specific needs. The device is designed for easy mounting on the Steketee weeding element but is also compatible with other weeder elements.

Adjustability and Compatibility
The weeder offers infinite adjustability in depth and width for varying operational intensities. It can be mounted either fixed or hinged. For row intervals of 25 to 40 cm, a smaller rotor is available. The device supports high-speed weeding due to its stable ball bearing system.

Options and Variants
Rubber fingers are available in diameters of 340 mm and 400 mm, while brush fingers are available only in a 340 mm diameter. For smaller row intervals, a 220 mm diameter rotor with rubber or optional brush fingers can be selected.

Key Features

Easily mountable and replaceable
Adjustable in length, width, and height

Contact Information
Machinefabriek Steketee BV, Lieve Vrouwepoldersedijk 1a, 3243 LA Stad aan ‘t Haringvliet, Tel: +31 187 616 100, Email: [email protected], Website: www.steketee.com

Catalog excerpts

Steketee Your specialist in soil treatment and weed control Finger weeder For inter-row weed control - Easily mountable - Easily replaceable - Adjustable in length - Adjustable in width - Adjustable in height The Steketee ﬁnger weeder is specially designed to control small and just emerged weeds in the crop row. In-crop mechanical weeding (by means of weeder blades, cultivation tines, ridger blades, etc) is a long standing practice. But a much higher percentage of the land can be mechanically cleaned from weeds with the ﬁnger weeder in combination with a weeder element. The ﬁnger weeder consists of a turning disc with ﬂexible ﬁngers on it. These ﬂexible ﬁngers turn in between the crop row and destroy smaller weeds. It is also possible to replace the disc with ﬂexible ﬁngers with a disc with brush ﬁngers. The ﬁnger weeder is specially made for mounting on the Steketee weeding element but can also be mounted on another weeder element without effort. The depth and width control can be inﬁnitely adjusted for a higher or lower operation intensity. Also, both mounting the ﬁnger weeder ﬁxed and hinged are possible. For 25 to 40 cm row intervals a smaller rotor can be supplied. The Steketee ﬁnger weeder is suitable for weeding with high speeds. The stable bearing by means of ball bearings renders a high rotational speed unproblematic. The rubber ﬁngers are available in various diameters. For example, a 340 mm and 400 mm rotor blade diameter can be selected. The versions with brush ﬁngers can only be supplied with a 340 mm diameter. A smaller rotor can be selected for smaller row intervals. This can be supplied with rubber ﬁnger discs with a 220 mm diameter. Optionally to be supplied with brush ﬁngers.

Open the catalog to page 1

Brush Finger Finger weeder view from above Hoeing blade with Finger weeders hoeing element with cultivator tine set and set of Finger weeders. Your dealer: Machinefabriek Steketee BV Lieve Vrouwepoldersedijk 1a 3243 LA Stad aan ‘t Haringvliet Tel: +31 187 616 100 Fax: +31 187 612 580 email: [email protected] www.steketee.com Your specialist in soil treatment and weed control

Open the catalog to page 2

weedcontrol

weedcontrol

Catalog excerpts

All Machinefabriek STEKETEE B.V. catalogs and technical brochures