1. Catalogs
  2. Machinerie SB Inc
  3. SB 10 Telescopic conveyor

SB 10 Telescopic conveyor

SB 10 Telescopic conveyor

SB 10 Telescopic conveyor

Product catalog summary
Overview: The SB 10 Telescopic Portable Conveyor by Machinerie S.B. Inc is designed for efficiency and ease of use, requiring only two people and less than three minutes to set up per 100 feet. It is engineered to reduce operational costs with a robust frame and pneumatic wheels, allowing for easy stacking and movement of up to eight sections simultaneously.
Specifications:
  • Motorless Section: 12.5 ft (3.8 m) length, 12-inch (30 cm) width, supports 125 pounds per section or 1000 pounds per 100 feet, includes wheels and tripod, adjustable leg height from 26" to 36" (65 to 90 cm), weight 110 pounds.
  • Motorized Section: 12.5 ft (3.8 m) length, 12-inch (30 cm) width, supports 125 pounds per section or 1000 pounds per 100 feet, drives 7 to 11 sections depending on weight, variable speed, adjustable leg height from 32" to 40" (80 cm to 1 m), belt speed 0 to 110 feet per minute, weight 275 pounds.
Power: Available in 120- and 230-volts single phase, 1 HP motor D.C. 10 Amps with variable speed forward and reverse options.
Options: Includes plug tray rack, 90-degree guide for container transfer, limit switch, motorized belt transfer corner, and remote start/stop capabilities.
Contact Information: For more details, visit www.sbee.ca or call 450-454-6260.
See more

Catalog excerpts

SB 10 Telescopic conveyor-1

Machinerie S.B. Inc Equipment manufacturer 1934 Notre-Dame, Saint-Rémi, Québec, J0L 2L0 President : Sylvain Bourdon Tel: 450-454-6260 E-mail: [email protected] SB 10 Telescopic portable conveyor Unique in its category, the set up requires only 2 people and takes less than 3 minutes per 100 feet of conveyor. The SB 10 was designed to cut down on the operation cost. Its strong frame and pneumatic wheels on all sections allow you to stack and move 8 sections at one time inside or out. Since all sections are on wheels, you won’t need to lift both ends at the same time. A “V” guide under the belt ensures tracking and alignment. You can buy this conveyor to the length you need, from 12. 5 feet (3.8m) to unlimited, we just add a motorized section at each 100 to 125 feet. Arrives ready to

 Open the catalog to page 1
SB 10 Telescopic conveyor-2

Motorless section: - Can old 125 pound per section -1000 pound per 100feet - Each section includes wheels and tripod - With V guide under belt for constant alignment - Adjustable leg 26" to 36” (65 to 90 cm) high with 16" (40 cm) wheel - Weight with adjustable tripod and wheels: 110 pounds - Can hold 125 pound per section -1000 pound per 100feet - The motorized section can drive 7 to 11 other sections all depending on the weight carried - Variable speed fw.rev. - Strong frame, power pack - Adjustable leg 32 to 40 in. (80 cm to 1 m) high with 16" (40 cm) wheel swivel - Belt speed 0 to 110 feet...

 Open the catalog to page 2
*Prices are pre-tax. They exclude delivery charges and customs duties and do not include additional charges for installation or activation options. Prices are indicative only and may vary by country, with changes to the cost of raw materials and exchange rates.