Rake 5940

1 / 2 PagesView full catalog

Rake 5940

Product catalog summary

Technical Specifications Summary for Mainero Rake

General Information:

Company: Carlos Mainero y Cia. S.A.I.C.F.I.
Location: Rivadavia 259, Bell Ville, Córdoba, Argentina
Contact: +54 (3537) 424 031

Key Specifications:

Sweeping Wheels: 8 wheels mounted on bearings with a diameter of 1520 mm.
Wire Specifications: 40 wires with a diameter of 8 mm.
Tractor Requirements: Minimum power of 40 CV (Din).
Coupling System: Trailed.
Hydraulic Group: Minimum pressure of 120 Kg/cm² with a single effect output to raise collector wheels.
Collector Wheels: Independent flotation with manual continuous regulation for working width.
Draw Bar: Adjustable in two positions for working and transport, with adjustable height hitch.
Wheels: 6.00 x 16 – 6 ply, agricultural type, with 3 guides.

Dimensions and Performance:

Transport Width: Minimum 3,150 mm.
Total Length: 8,600 mm.
Working Width: Maximum 4,800 mm with continuous regulation.
Maximum Clearance for Collector Wheels: 600 mm.
Total Weight: 860 Kg.
Working Speed: Maximum 15 km/hour.

Additional Notes:

Specifications may vary based on land conditions, available power, forage type, and working width.
The company reserves the right to make changes without prior notice.

Catalog excerpts

RAKE Mainero

Open the catalog to page 1

TECHNICAL SPECIFICATIONS Sweeping wheels (quantity) Variable according to the condition of the land, available power, density and type of forage, working width, etc. The Company reserves the right to make changes in its products without prior notice.

Open the catalog to page 2

Rake 5940

Rake 5940

Catalog excerpts

All Mainero catalogs and technical brochures