Flail Mower RBRM115/130/155 Microtracteur 25 - 60 HP With power grip 540 tr/min Working width 115, 130 or 155 cm 3 point linkage cat. 1 Delivered with cardan shaft 3 positions offset, 0 - 5 - 10 cm Y-knives width 40 mm thickness 5 mm Cutting height adjustable from -1.5 to 11cm depending on knife type (Y, hammers, paddles or scarificator) The advantages: Helical steel gearbox with free wheel: Transmission of efforts without noise or vibration Substantial fuel savings due to the rotor design Rotor with helical position: even drive effort for optimal crush big rotor tube : cutting rigidity and inertia, electronic balancing after assembly of knives. Reduced energy consumption and CO2-emission High rotation speed: rotation 2500 tr/min, cutting speed of 42m/s for a perfect cut and crush System to avoid gras jam: no risque of gras winding around the roll Curved chassis: the chassis form and the particular disposition of the back roll potimize the ventilation, ejection and self-cleaning of the roll. Armoured sheet thickness 3 mm on model 155 Back roll: especially conceived to resist lateral moves and to protect from projections Large opening: allows to swallow the vegetation without flatten Drive: 3 trapezoidal belts, adjustable tension can be controlled easily Security, ergonomic: lateral deflectors adjustable, front flaps anti-projection, lifting eye in the centre of gravity for handling Lubrication accessible without disassembly Serial assembly with Y-knives

Back roll: Bearings protected by anti-grass jam system Mud scraper on rotor to avoid grass jam Lubrification accessible Assembly poulley eccentric ring + keyway Anti-intrusion roll fairing Opening to press belts with screw driver Light to visualize the tension Lubrification accessible Idler bearing accessible