Swing Flail Mower PRO RBRMDG
1 / 2Pages

Intense Crushing Swing Flail Mower RBRM 115/130/155DG30 HydraulicOffset Kit DGH30 optional Microtractor 20 - 45 HP with power grip 540 tr/min equipped with 1 double acting control valve for hydraulic kit Working width 115, 130 and 155 cm 3 point linkage cat. 1 Delivered with cardan shaft Adjustable offset 30 cm by mechanical indexing Y - knives width 40 mm thickness 5 mm Cutting height adjustable from -1.5 to 11cm depending on knife type (Y, hammer, paddles or scarificator) The advantages : Helical steel gearbox with free wheel: Transmission of efforts without noise or vibration Substantial fuel savings due to the rotor design Rotor with helical position: even drive without effort for optimal crush. Big rotor tube : cutting rigidity and inertia, electronic balancing after assembly of knives. Reduced energy consumption and CO2-emission High rotation speed: rotation 2500 tr/min, cutting speed of 42m/s for a perfect cut and crush System to avoid grass jam: no risk of grass winding around the roll Curved chassis: the chassis form and the particular disposition of the back roll optimize the ventilation, ejection and self-cleaning of the roll Armoured sheet thickness 3 mm on model 155 Large opening: allows to swallow the vegetation without flatten Haute ouverture a l’entree : permet d’avaler la vegetation haute sans la coucher. Drive: 3 trapezoidal belts, adjustable tension can be controlled easily Security, ergonomic: lateral deflectors adjustable, front flaps anti-projection, lubrication accessible without disassembly Option hydraulique : Cylinder hoses with coupling 1/2" and valves for speed setting. Cylinder stroke 30 cm. A tractor with 2 double acting control valves is necessary Serial Assembly with Y-knives Optional assembly : Paddles hammers

Mud scraper on rotor to avoid grass jam Back roll: Bearings protected by anti-grass jam system Assembly poulley eccentric ring + keyway Lubrification accessible Anti-intrusion roll fairing Light to visualize the tension Opening to press belts with screw driver Serial assembly with mechanical indexing Adjusting bar with 10 cm steps Assembly with hydraulic option cylinder speed adjustment Double acting cylinder stroke 30 cm