Swing Flail Mower RBMLDG


Catalog excerpts

Swing Flail Mower RBMLDG - 1

MAMR Swing Flail Mower RBML115/130/155DG30 Hydraulic Offset Kit DGH30 optional Microtractor 20 - 45 HP with power grip 540 tr/min 1 double acting control valve for hydraulic kit Working width 115, 130 and 155 cm Attelage arriere 3 points cat.1 Delivered with cardan shaft Gearbox with freewheel Adjustable offset 30 cm by mechanical indexing Y - knives width 40 mm thickness 5 mm Cutting height adjustable from -1.5 to 11cm depending on knife type (Y, hammer, paddles or scarificator) Th e advantages : Substantial fuel savings due to the rotor design Rotor with helical position: even drive without effort for optimal crush. Big rotor tube : cutting rigidity and inertia, electronic balancing after assembly of knives. Reduced energy consumption and CO2-emission High rotation speed: rotation 2500 tr/min, cutting speed of 42m/s for a perfect cut and crush System to avoid grass jam: no risk of grass winding around the roll Curved chassis: the chassis form and the particular disposition of the back roll optimize the ventilation, ejection and self-cleaning of the roll Armoured sheet thickness 3 mm on model 155 Large opening: allows to swallow the vegetation without flatten Drive: 2 trapezoidal belts, adjustable tension can be controlled easily Security, ergonomic: lateral deflectors adjustable, front flaps anti-projection, lifting eye in the centre of gravity for handling Lubrication accessible without disassembly. Bearing and lubrificators protected against impacts or cutting rejection. Option hydraulique : Cylinder hoses with coupling 1/2" and valves for speed setting. Cylinder stroke 30 cm. A tractor with 2 double acting control valves is necessary Serial Assembly with Y -knives Optional assembly : Paddles hammers

Open the catalog to page 1
Swing Flail Mower RBMLDG - 2

Mud scraper on rotor to avoid grass jam Back tyre : Ball bearing to avoid grass jam Lubrification accessible Assembly poulley eccentric ring + keyway Anti-intrusion roll fairing Light to visualize the tension Opening to press belts with screw driver Serial assembly with mechanical indexing Adjusting bar with 10 cm steps Assembly with hydraulic option cylinder speed adjustment Double acting cylinder stroke 30 cm

Open the catalog to page 2

All Majar catalogs and technical brochures