Nordre Banegate 26 4515, Mandal, Norway Legacy Through Innovation A Michelin Group Company DRAGMAN STANDARD Dragman series of high quality flexible lay flat hoses are designed for especially rough use with umbilical drag systems for distribution of slurry and manure in agricultural fields. Designed for umbilical drag system used for distribution of slurry and manure in agricultural fields. Engineered with extreme tensile strength and abrasion properties. High tenacity filament polyester yarn . UMBILICAL DRAG HOSE SYSTEM Covered and lined with Thermoplastic Polyurethane (TPU). Extrusion through the Weave Technology - ensuring ultimate adhesion between TPU and the weave. Heavily reinforced weave ensuring required longitudinal Tensile strength and Burst pressure. FLEXIBLE LAY-FLAT HOSE Ultimate tensile strength and adhesion level polymer to weave. Enhanced abrasion resistance. High diameter and extension stability. Low kink radius. High puncture resistance. Temperature range -50 to 75 ºC (pure water) (-58 ºF to +167 ºF). Standard lengths depending on diameter. Excellent UV and weathering resistance. DRAG LINE TECHNICAL DATA INTERNAL DIAMETER WALL THICKNESS NOTE: Safety BP/WP is 2:1 (50%). For all non-hazard and/or non-flammable liquids. BURST PRESSURE TENSILE STRENGTH While we have made every attempt to ensure that the information contained in this brochure is accurate, Mandals is not responsible for any errors or omissions, or for the results obtained from the use of this information. Mandals reserves the right to modify any specifications without prior notice to meet or exceed changing standards. For special diameters, features and construction characteristics please contact us at [email protected]